Introducing The ZCI Zero Contact Modulite And Installation Kit
1.Firstly, open up the package and remove the contents. You should find the module itself, along with an instruction manual and installation kit.
2. Take out the module and hold it against the inside of your headlight housing, making sure that the two metal contact points are lined up with the corresponding holes in the housing.
3. Once you’re happy with the positioning, gently push the module into place so that the metal contacts make contact with the holes. You may need to use a small amount of force to get it properly seated.
4. Now take the installation kit and locate the two rubber grommets. Place one of these over each of the exposed metal contact points on the back of the module.
5. Thread the included screws through each of the grommets and hand-tighten them so that they’re snug but not overly tight.
6. That’s it! Your ZCI Zero Contact Modulite is now installed and ready to be used.
Why Zci Zero Contact Modulite And Installation Kit Is Necessary?
Installing a ZCI Zero Contact Modulite and Installation Kit is necessary to ensure that your vehicle has the proper lighting. These products are designed to provide the best possible light output and reliability. They are also easy to install and require minimal wiring.
Our Top Picks For Best Zci Zero Contact Modulite And Installation Kit
Best Zci Zero Contact Modulite And Installation Kit Guidance
The Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit is a great way to activate your trailer’s stop/turn/tail/running lights without having to cut or splice into your vehicle’s wiring system. The kit comes with current sensors that snap onto your trailer’s light assemblies, and the module connects directly to your vehicle’s battery. This ensures that your trailer lights will operate independently of your vehicle’s electrical system, and that there will be no interference with the tow vehicle’s electrical system. The ModuLite is also equipped with short circuit/overload protection, and is rated at 42 amps for turn/stop circuits and 75 amps for taillight circuits.
Common Questions on Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit
• What is the Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit?The Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit is a special device that allows you to install a trailer’s brake controller without having to wire it directly into the vehicle’s electrical system. The kit comes with everything you need to install the brake controller, including the necessary wiring and connectors.
• Why would I want to use the Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit?
There are a few advantages to using the Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit. First, it’s much easier to install than a traditional brake controller. Second, it doesn’t require any special tools or knowledge to install. Third, it’s completely invisible once installed, so it won’t detract from the look of your vehicle.
• How does the Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit work?
The Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit uses a special magnet to connect the
Why We Like This
• 1. The Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit activates a trailer’s stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system.• 2. The included current sensors snap on to provide easy installation.• 3. The ModuLite® is rated at 42 amps for turn/stop circuits and 75 amps for taillight circuits.• 4. The ModuLite® works on all vehicle types including standard, PWM and/or multiplex systems.• 5. The ModuLite®’s direct connection to the tow vehicle battery eliminates all electrical connection and interference with the tow vehicle electrical system.
Additional Product Information
| Height | 3.75 Inches |
| Length | 48 Inches |
| Weight | 1.86 Pounds |
When it comes to wiring your trailer, there is no better option than the I LITTON 7 Way Trailer Wiring Harness Kit. This kit comes with everything you need to get your trailer up and running, including a 7 blade trailer plug, a junction box, and 7 colored wires. The heavy duty construction and premium materials used in this kit ensure that your trailer will be wired securely and Durably. The flexible 8ft extension cord makes it easy to wire your trailer from the front to the rear of your vehicle. And with I LITTTON’s “12 Months Warranty”, you can be confident that your purchase is backed by our commitment to quality customer service.
Common Questions on I LITTON 7 Way Trailer Wiring Harness Kit Trailer Cord with 7 Gang Junction Box Heavy Duty 7 Blade Trailer Plug with Junction Cable 7 Pin Wiring Harness Trailer Connector for RV Camper Trailer (8Feet)
• What is the I Litton 7 Way Trailer Wiring Harness Kit used for?The I Litton 7 Way Trailer Wiring Harness Kit is used to connect your trailer’s wiring system to your vehicle’s. It includes a 7-way junction box and a heavy-duty 7-blade trailer plug, both of which are designed for easy hookup and weather resistance.
• How long is the I Litton 7 Way Trailer Wiring Harness Kit?
The I Litton 7 Way Trailer Wiring Harness Kit is 8 feet long.
• How many wires does the I Litton 7 Way Trailer Wiring Harness Kit have?
The I Litton 7 Way Trailer Wiring Harness Kit has 7 wires.
• What is the I Litton 7 Way Trailer Wiring Harness Kit made of?
The I Litton 7 Way Trailer Wiring Harness Kit is made of high-quality materials that are designed for durability and weather resistance.
• Where can I find the I Litton 7 Way Trailer Wiring Harness Kit?
The I Litton 7 Way Trailer Wiring Harness Kit is available at most
Why We Like This
• 1. 8 feet long, 7 blade trailer trailer wiring harness with junction box• 2. Durable PVC jacket, flameproof ABS junction box, heavy duty trailer plug• 3. 100% copper wires• 4. 7 colored poles for easy identification and connection• 5. Flexible connection with heavy duty 8ft long extension cord
Looking to add some versatility to your towing options? Curt has you covered with this vehicle-side trailer wiring harness. This harness kit plugs into existing factory wiring on your Jeep Wrangler JL or Gladiator and provides a standard, 4-pin trailer connector for plugging in and towing a trailer. It’s easy to install – no cutting or splicing required – and comes with a rubber dust cover to keep the connector clean and protected when not in use. Whether you’re hauling a small utility trailer or a larger camper, this harness is a great way to get your Jeep ready for towing.
Common Questions on CURT 56407 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Jeep Wrangler JL, Gladiator , Black
• What is the part number for this product?The part number for this product is CURT 56407.
• What vehicle is this product designed to fit?
This product is designed to fit select Jeep Wrangler JL and Gladiator vehicles.
• What is the color of this product?
This product is black.
Why We Like This
• EASY TO INSTALL• STANDARD CONNECTOR• VEHICLE SPECIFIC• RELIABLE POWER• DUST COVER
Additional Product Information
| Color | Black |
| Height | 3 Inches |
| Length | 9 Inches |
| Weight | 1.78 Pounds |
The Tekonsha (119250) T-Connector is a great way to activate a trailer’s stop/turn/tail/running lights without having to cut or splice into your vehicle’s wiring system. The included current sensors simply snap onto the trailer, and the re-settable short circuit/overload protection guards both the trailer and the vehicle from potential damage. The T-Connector is rated at 42 amps for turn/stop circuits and 75 amps for the taillight circuit, and it works on all vehicle types, including standard, PWM, and/or multiplex systems.
Common Questions on Tekonsha (119250) T-Connector
• What is the manufacturer part number for the Tekonsha T-Connector?The manufacturer part number for the Tekonsha T-Connector is 119250.
• What is the weight of the Tekonsha T-Connector?
The weight of the Tekonsha T-Connector is 1.6 ounces.
• What is the length of the Tekonsha T-Connector?
The length of the Tekonsha T-Connector is 3.5 inches.
• What is the width of the Tekonsha T-Connector?
The width of the Tekonsha T-Connector is 1.5 inches.
• What is the height of the Tekonsha T-Connector?
The height of the Tekonsha T-Connector is 0.8 inches.
Why We Like This
• 1. The Tekonsha (119250) T Connector activates a trailer’s stop/turn/tail/running lights without cutting or splicing into your vehicle’s wiring system.• 2. This T Connector is rated at 42 amps for turn/stop circuits and 75 amps for taillight circuits.• 3. The Tekonsha (119250) T Connector works on all vehicle types including standard, PWM and/or multiplex systems.• 4. This T Connector can be used on 2 or 3 wire systems.• 5. The Tekonsha (119250) T Connector has re settable short circuit/overload protection.
If you’re looking to tidy up your trailer wiring, the Nilight 50048R 7 Way Electrical Trailer Junction Box is a great option. This junction box features seven terminal studs, providing a safe and secure way to install or rewire your trailer. The box is also weatherproof, thanks to its durable plastic housing and rubber grommets, making it an ideal choice for protection against nature’s bad days. Plus, with its quick and easy installation, the Nilight junction box is a great way to upgrade your old trailer wiring.
Common Questions on Nilight – 50048R 7 Way Electrical Trailer Junction Box 7 Gang Trailer Wire Connector Junction Box Weatherproof for Rewiring Camper RV Caravans Boat 7 Pole Cable Connection Box,2 Years Warranty
• What is the purpose of the Nilight – 50048R 7 Way Electrical Trailer Junction Box?The Nilight – 50048R 7 Way Electrical Trailer Junction Box is used to provide a safe and easy way to connect the wiring on trailers, RVs, and other vehicles.
• How do I install the Nilight – 50048R 7 Way Electrical Trailer Junction Box?
Installation is easy, simply screw the box to a convenient location and connect the wires according to the included instruction diagram.
• What are the dimensions of the Nilight – 50048R 7 Way Electrical Trailer Junction Box?
The Nilight – 50048R 7 Way Electrical Trailer Junction Box is 3.54″ x 2.76″ x 1.38″.
• What is the warranty period for the Nilight – 50048R 7 Way Electrical Trailer Junction Box?
The Nilight – 50048R 7 Way Electrical Trailer Junction Box comes with a 2-year warranty.
Why We Like This
• 1. A sturdy 7 Pore Trailer Junction Box with 7 terminal studs provides safe and secure trailer wiring install with markings to easily identify the correct connections.• 2. Quickly adds additional equipment and lights, change the power connector, or redo your trailer cable without leaving any wire splices exposed to the elements.• 3. Durable plastic housing coupled with rubber grommets provides superb protection against nature’s bad days.• 4. Quickly adds extra lights and accessories Upgrade your old trailer wiring, makes re wiring, troubleshooting and fixing electrical problems much simpler• 5. Perfect for wiring up your trailer, camper, caravans, boats and other towed vehicles.
Benefits of Zci Zero Contact Modulite And Installation Kit
When looking for a zero contact module installation kit, the best option is the ZCI Modulite. This installation kit offers many benefits that other kits do not. One of the biggest benefits is that it allows for a completely custom installation. With this kit, you can choose exactly where each component will be installed and how it will be connected. This means that you can tailor the system to your specific vehicle and needs.
Buying Guide for Best Zci Zero Contact Modulite And Installation Kit
When shopping for a zci zero contact modulite and installation kit, there are several things you’ll want to keep in mind in order to get the best product for your needs. Here are some tips:
1. Determine what size zci zero contact modulite and installation kit you need. There are kits available in different sizes, so make sure to get one that will fit your vehicle.
2. Consider the features of different kits. Some come with additional features like LED lights or a remote control, which can be handy.
3. Read reviews of different products before making your purchase. This will help you see how well each product performs and if there are any common problems with it that you should be aware of.
Frequently Asked Question
What are the best features of the ZCI Zero Contact Modulite and Installation Kit?
There are many features that make the ZCI Zero Contact Modulite and Installation Kit the best on the market. The first feature is the ease of installation. With the included installation template, you can have the entire unit installed in minutes with no special tools required. The second feature is the unique modulite design. This allows the user to choose between five different light settings, which can be customized to their specific needs. The third feature is the rugged construction. The ZCI Zero Contact Modulite and Installation Kit are made from high-quality materials that can withstand the elements and provide years of trouble-free use.
How does the ZCI Zero Contact Modulite and Installation Kit work?
The ZCI Zero Contact Modulite and Installation Kit is designed to allow the installation of a low voltage lighting system without the need for any low voltage wiring. The system uses a plug and play design that allows the user to simply plug the system into a standard 120 volt outlet and then install the lights. The system comes with a variety of different light fixtures that can be used to create a variety of different lighting effects.
What are the benefits of using the ZCI Zero Contact Modulite and Installation Kit?
Some benefits of using the ZCI Zero Contact Modulite and Installation Kit include the following: -The ZCI Modulite helps to reduce installation time and costs by eliminating the need for traditional wet gluing methods. -The ZCI Modulite is easier to install than traditional wet glues, and does not require the use of a curing oven. -The ZCI Modulite is a more environmentally friendly product, as it does not contain volatile organic compounds (VOCs).
How easy is the ZCI Zero Contact Modulite and Installation Kit to install?
The ZCI Zero Contact Modulite and Installation Kit is very easy to install. The entire process takes less than 10 minutes, and the kit includes everything you need for a successful installation.
How does the ZCI Zero Contact Modulite and Installation Kit compare to other similar products on the market?
There are other products that are similar. These products typically use a different method to install the device, such as a adhesive or screw. The Modulite and Installation Kit is unique because it does not require any screws or adhesive, which makes it very easy to install.
Conclusion
Thank you for your time. The ZCI Zero Contact Modulite and Installation Kit is the best on the market and will provide you with everything you need to get the job done right. With its easy installation and superior performance, this product is a must-have for any homeowner. Thanks again for your interest, and we hope you have a great day.