Best Oil Pressure Sensor For Subaru
esign: The design of the sensor will vary depending on the make and model of your vehicle. You will want to make sure that the design of the sensor matches the specifications of your car.
Compatibility: You will want to make sure that the sensor you purchase is compatible with your vehicle. Most sensors will list the specific models of cars they are compatible with on the packaging.
Installation: Some sensors may require special tools or connectors for installation. You will want to make sure that you have the necessary tools and equipment for installation before purchasing a sensor.
Warranty: Some manufacturers offer warranties on their products. You may want to consider a sensor with a warranty in case of any problems during installation or use.
Why Subaru Oil Pressure Sensor Is Necessary?
The Subaru oil pressure sensor is a small, but important, component in the engine of your vehicle. It helps maintain the proper oil pressure in the engine by working with the oil pump to regulate how much oil is flowing through it. If there is too much or too little oil pressure, it can cause damage to engine components.
Our Top Picks For Best Subaru Oil Pressure Sensor
Best Subaru Oil Pressure Sensor Guidance
Subaru Genuine Subaru Oil Pressure Switch AVCS Sensor Impreza Forester Legacy Outback
If you’ve ever wondered what that little black box labeled “AVCS” on your Subaru is all about, wonder no more! The AVCS, or Active Valve Control System, is a system that adjusts the timing of the intake valves based on the engine’s speed and load. This allows for better power and fuel economy.
The AVCS oil pressure sensor is responsible for monitoring the oil pressure in the system. If the pressure gets too low, it can cause the engine to run poorly or even stall. If you’re having problems with your AVCS system, it’s a good idea to check the oil pressure sensor first.
Replacing the AVCS oil pressure sensor is a pretty simple job that anyone with basic automotive knowledge can do. You’ll just need a few tools and a new sensor. Follow these steps and you’ll have it replaced in no time!
1. Disconnect the negative battery terminal.
2. Locate the AVCS oil pressure sensor. It’s located on the driver’s side of the engine, near the oil filter.
3. Use a wrench to loosen the sensor’s mounting bolt.
4. Pull the sensor out of its mounting hole and disconnect the electrical connector.
5. Install
Common Questions on Subaru Genuine Subaru Oil Pressure Switch AVCS Sensor Impreza Forester Legacy Outback
• What is the name of the part?Subaru Genuine Oil Pressure Switch AVCS Sensor
• What does the part do?
The Subaru Genuine Oil Pressure Switch AVCS Sensor is responsible for monitoring the oil pressure in the engine and sending a signal to the engine control unit to adjust the timing of the engine.
• Where is the part located?
The Subaru Genuine Oil Pressure Switch AVCS Sensor is located on the oil filter housing.
• How often should the part be replaced?
The Subaru Genuine Oil Pressure Switch AVCS Sensor should be replaced every 30,000 miles.
• What are the symptoms of a failed part?
If the Subaru Genuine Oil Pressure Switch AVCS Sensor fails, the engine may run rough or stall.
Why We Like This
• Fits 2006 2012 Subaru Legacy and Outback• Fits 2005 2009 Subaru Legacy and Outback 30• Fits 2006 2011 Subaru Forester• Fits 2006 2011 Subaru Impreza• Fits 2006 2007 Subaru Tribeca• Genuine Subaru part
ACDelco Professional U8001 Engine Oil Pressure Switch
The ACDelco Professional U8001 Engine Oil Pressure Switch is a premium aftermarket replacement that provides the performance and dependability you expect from ACDelco. It is manufactured to meet expectations for fit, form, and function, and is backed by ACDelco’s 2-year/24,000-mile limited warranty.
Common Questions on ACDelco Professional U8001 Engine Oil Pressure Switch
• What is the ACDelco Professional U8001 Engine Oil Pressure Switch?The ACDelco Professional U8001 Engine Oil Pressure Switch is a switch that is used to monitor the oil pressure in an engine.
• What are the features of the ACDelco Professional U8001 Engine Oil Pressure Switch?
The ACDelco Professional U8001 Engine Oil Pressure Switch has a brass body with a copper wafer for durability and corrosion resistance. It also has a Viton O-ring for a tight seal.
• What is the oil pressure range that the ACDelco Professional U8001 Engine Oil Pressure Switch can handle?
The ACDelco Professional U8001 Engine Oil Pressure Switch can handle oil pressure ranges from 0-100 PSI.
• What is the thread size of the ACDelco Professional U8001 Engine Oil Pressure Switch?
The ACDelco Professional U8001 Engine Oil Pressure Switch has a 1/8″ NPT thread size.
• What is the maximum voltage that the ACDelco Professional U8001 Engine Oil Pressure Switch can handle?
The ACDelco Professional U8001 Engine Oil Pressure Switch can handle a
Why We Like This
• 1) Professional, premium aftermarket replacement.• 2) Provides the performance and dependability you expect from ACDelco.• 3) Manufactured to meet expectations for fit, form, and function.• 4) Durable construction for long lasting performance.• 5) Engineered to strict quality standards.
Additional Product Information
| Height | 1.7 Inches |
| Length | 3.6 Inches |
| Weight | 0.1 Pounds |
Standard Motor Products PS160 Oil Pressure Sender
The Standard Motor Products PS160 Oil Pressure Sender is designed to send oil pressure readings from your vehicle to your gauge in order to keep track of your engine’s health. This product is made in China and its package dimensions are 12x31x12 inches.
Common Questions on Standard Motor Products PS160 Oil Pressure Sender
• What is the model number of the Standard Motor Products PS160 Oil Pressure Sender?PS160
• What is the function of the Standard Motor Products PS160 Oil Pressure Sender?
The PS160 Oil Pressure Sender is designed to read and transmit oil pressure readings to the engine control unit.
• What are the dimensions of the Standard Motor Products PS160 Oil Pressure Sender?
The PS160 Oil Pressure Sender has a diameter of 3/4″ and a length of 1-1/4″.
• What is the Maximum Operating Temperature of the Standard Motor Products PS160 Oil Pressure Sender?
The maximum operating temperature of the PS160 Oil Pressure Sender is 250 degrees Fahrenheit.
• What is the Minimum Operating Temperature of the Standard Motor Products PS160 Oil Pressure Sender?
The minimum operating temperature of the PS160 Oil Pressure Sender is -40 degrees Fahrenheit.
Why We Like This
• 1. Original equipment quality• 2. Direct fit replacement• 3. Designed for durability• 4. Easy installation• 5. Backed by a manufacturer’s warranty
Additional Product Information
| Color | Assorted |
| Height | 3 Inches |
| Length | 2 Inches |
| Weight | 0.06 Pounds |
GlowShift Oil Galley Plug Thread Adapter Compatible with Subaru EJ Engines – for Oil Pressure & Oil Temperature Gauge Sensors Sending Units
The GlowShift Oil Galley Plug Thread Adapter is a MUST HAVE for any Subaru owner with an EJ engine. This bad boy replaces your factory oil galley plug and allows you to install an oil pressure or oil temperature sensor, giving you the ability to keep a close eye on your engine’s vitals. It’s compatible with all Subaru EJ engines and comes with an M18 x 15 male thread with teflon tape, 1/8-27 NPT female thread port and a crush washer. Plus, our world-class customer support team is here to answer any questions you may have and our one year limited warranty has got you covered.
Common Questions on GlowShift Oil Galley Plug Thread Adapter Compatible with Subaru EJ Engines – for Oil Pressure & Oil Temperature Gauge Sensors Sending Units
• What is the GlowShift Oil Galley Plug Thread Adapter Compatible with Subaru EJ Engines – for Oil Pressure & Oil Temperature Gauge Sensors Sending Units?The GlowShift Oil Galley Plug Thread Adapter is compatible with Subaru EJ engines and is used for oil pressure and oil temperature gauge sensors and sending units.
• What are the dimensions of the GlowShift Oil Galley Plug Thread Adapter?
The adapter has a diameter of 14mm and is 20mm long.
• How is the GlowShift Oil Galley Plug Thread Adapter installed?
The adapter is installed by screwing it into the oil filter housing.
Why We Like This
• Replaces Front or Rear Factory Oil Galley Plug• Allows Users to Install an Oil Pressure or Oil Temperature Sensor• Compatible with Subaru EJ Engines• M18 x 15 Male Thread with Teflon Tape• 1/8 27 NPT Female Thread Port & Crush Washer
GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter Compatible with Scion FR-S 2013-2016, Subaru BRZ 2013-2020 & Toyota GT86 2012-2016
The GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter is an essential part of the installation process for GlowShift Oil Pressure & Oil Temperature Sensors. This thread adapter allows you to install up to three sensors from one unit, and is compatible with 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ & 2012-2016 Toyota GT86. The GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter features a 1/8 BSPT male thread, (2) 1/8-27 NPT female threads, (1) 1/8-27 NPT port plug & (1) 1/8 BSPT female thread. It also comes with step-by-step installation instructions to make the process as easy as possible. The GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter is backed by a one year limited warranty and free lifetime technical support.
Common Questions on GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter Compatible with Scion FR-S 2013-2016, Subaru BRZ 2013-2020 & Toyota GT86 2012-2016
• What is the GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter Compatible with Scion FR-S 2013-2016, Subaru BRZ 2013-2020 & Toyota GT86 2012-2016?The GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter is compatible with the Scion FR-S 2013-2016, Subaru BRZ 2013-2020, and Toyota GT86 2012-2016.
• What are the dimensions of the GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter?
The GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter has the following dimensions: 1/8″ BSPT Male x M12x1.25 Female.
• What is the maximum operating pressure for the GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter?
The maximum operating pressure for the GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter is 150 PSI.
• What is the maximum operating temperature for the GlowShift 1/8 BSPT Oil Pressure & Oil Temperature Sensor Thread Adapter?
The maximum operating temperature for
Why We Like This
• Allows users to install up to 3 sensors from 1 unit• Compatible with 2013 2016 Scion FR S, 2013 2020 Subaru BRZ & 2012 2016 Toyota GT86• Features a 1/8 BSPT male thread, (2) 1/8 27 NPT female threads, (1) 1/8 27 NPT port plug & (1) 1/8 BSPT female thread• Includes step by step installation instructions• GlowShift guarantee with one year limited warranty & free lifetime technical support
Additional Product Information
| Height | 10 Inches |
| Length | 0.5 Inches |
| Weight | 0.5 Pounds |
Benefits of Subaru Oil Pressure Sensor
As vehicles become more and more complex, the need for reliable oil pressure sensors increases. Subaru’s best subaru oil pressure sensor is designed to provide accurate and consistent readings, ensuring your vehicle’s engine is always running at its best. Here are just a few of the benefits of using this top-of-the-line sensor:
Increased accuracy – The Subaru oil pressure sensor uses a piezoelectric crystal that vibrates when exposed to pressures changes. This provides much greater accuracy than traditional mechanical sensors.
Better durability – With no moving parts, the Subaru sensor is highly resistant to wear and tear. It also has a significantly higher operating temperature range than competing products, making it ideal for high performance applications.
Faster response time – Thesensitive piezoelectric crystal responds quicklyto changes in engine oil pressure, providing real-time data that can be used to make adjustments on the fly. This instant feedback helps you keep your engine tuned for optimal performance at all times.
Buying Guide for Best Subaru Oil Pressure Sensor
A good Subaru oil pressure sensor should have the following features:
1. Accurate readings: The sensor should be able to provide accurate readings of the oil pressure in your engine.
2. Sturdy construction: The sensor should be made of durable material that can withstand the high temperatures and pressures inside an engine.
3. Easy to install: The sensor should be easy to install, so you can do it yourself without having to take your car to a mechanic.
Frequently Asked Question
What is the best Subaru oil pressure sensor?
Some recommended Subaru oil pressure sensors include the Autometer Ultralite Oil Pressure Sensor, the Perrin Performance Oil Pressure Sensor, and the Blox Racing Oil Pressure Sensor.
Where is the best place to purchase a Subaru oil pressure sensor?
One place to purchase a Subaru oil pressure sensor is from the Subaru dealer.
What are the symptoms of a failing Subaru oil pressure sensor?
The symptoms of a failing Subaru oil pressure sensor can include the engine oil light coming on, the engine oil pressure gauge dropping to zero, and the engine making a loud knocking noise.
How often should the Subaru oil pressure sensor be replaced?
Most sensors should be replaced every 50,000 miles.
What can cause the Subaru oil pressure sensor to fail?
Many things can cause the oil pressure sensor to fail, but some of the most common causes are a build-up of oil sludge or debris, a faulty oil pump, or a clogged oil filter.
Conclusion
Thank you for your time. I hope I have convinced you that the best subaru oil pressure sensor is the right choice for your vehicle. This product will save you time and money in the long run, and it is backed by a trusted name in the automotive industry.