Best LS Water Pump Spacers To Help You Get The Most Out Of Your Engine
The best way to find the right spacer for your pump is to consult the manufacturer’s guidelines. They will have suggestions on which type of spacer is best for your model. If you’re unsure, it’s always best to err on the side of caution and go with a spacer that offers a bit more clearance than you think you need.
In general, however, there are a few things to keep in mind when choosing a water pump spacer. First, make sure that the spacer is made from a durable material that won’t corrode or warp over time. Second, check to see if the spacer has any special features that could come in handy, such as an integrated bleed valve or an easy-to-grip design.
With these factors in mind, you should have no trouble finding the best water pump spacer for your needs.
Why Ls Water Pump Spacers Is Necessary?
The water pump is the heart of the cooling system, circulating coolant throughout the engine. The pump is mounted on the front of the engine and consists of a pulley and impeller inside a housing. The impeller draws coolant in from the radiator and pumps it through the engine block and heads, where it picks up heat. The now-hot coolant then flows back to the radiator where it gives off its heat to the air passing through the fins.
A water pump spacer is an important component in ensuring that your water pump operates efficiently. It helps to create correct alignment between your water pump pulley and crankshaft, preventing wear on bearings and eliminating vibration. A properly installed spacer also provides for better cooling by allowing increased airflow around critical engine components such as valves and spark plugs.
Our Top Picks For Best Ls Water Pump Spacers
Best Ls Water Pump Spacers Guidance
If you’re looking for a simple and straightforward way to install an LS engine in your truck, you’ll want to consider using LS water pump spacers. These spacers are designed to adapt an LS1 Camaro water pump to an LS truck engine block, and they can also be used with other LS-based engines. They’re made from high-quality aluminum for increased durability and corrosion resistance, and they’re an essential part of any LS engine swap.
Common Questions on LS Water Pump Spacers kit, LS Water Pump Spacers,7″thick Adapter Swap Kit,for Camaro LLSX LS LS2 LQ4
• What is the LS Water Pump Spacer?The LS water pump spacer is a device that is used to space the water pump away from the engine block.
• Why is the LS Water Pump Spacer important?
The LS water pump spacer is important because it helps to ensure that the water pump is properly positioned and can function properly.
• What are the dimensions of the LS Water Pump Spacer?
The LS water pump spacer is 7″ thick and has an adapter swap kit that is used for camaro LLSX LS LS2 LQ4 engines.
Why We Like This
• 1. Made of high quality aluminum for increased durability and corrosion resistance.• 2. Converting your truck water pump to an LS1 car water pump allows for easier installation of low profile intake manifolds and possibly simpler radiator hose routing.• 3. Compatible with 1998 2002 LS1 Camaro water pump to LS truck engine block, 1999 2019 Chevy small Block Gen III/IV (LS based engine) V8 60L, 1999 2017 Chevy small block Gen III/IV ( LS based engine) V8 48L, 1999 2014 Chevy small block Gen III/IV (LS based engine) V8 53L.• 4. Please confirm your model before purchasing, if you are not sure whether it is suitable for your original model, please contact us to solve the problem.• 5. After you receive the product, if the product is damaged, lost, unusable or any other questions, please feel free to contact our customer service, we can refund you or resend new products to bring you more satisfaction shopping experience.
ICT Billet is proud to introduce their new water pump spacer adapter kit for LS1 Camaro to Truck engines. This kit allows for a quick and easy way to swap out your water pump, without having to remove the entire engine! The adapter kit comes with all the necessary hardware and instructions for a straightforward installation. With this kit, you will be able to retain your stock water pump, saving you money and time!
Common Questions on ICT Billet (LS1 Camaro to Truck) Water Pump Spacer .7″ Adapter Swap kit LSX LS LS3 LQ4 GTO 551690-71
• What is ICT Billet?ICT Billet is an automotive parts manufacturer that specializes in LSx performance parts.
• What is the ICT Billet Water Pump Spacer Adapter Swap Kit?
The ICT Billet Water Pump Spacer Adapter Swap Kit is designed to allow you to install an LS1 camaro water pump on your LSx truck.
• Why would I want to install an LS1 camaro water pump on my LSx truck?
The LS1 camaro water pump is a high-performance pump that can offer increased cooling capacity and flow, making it ideal for modified or high-performance engines.
• What are the benefits of using the ICT Billet Water Pump Spacer Adapter Swap Kit?
The main benefits of using the ICT Billet Water Pump Spacer Adapter Swap Kit are increased cooling capacity and flow, and the ability to use a high-performance LS1 camaro water pump on your LSx truck.
• How do I install the ICT Billet Water Pump Spacer Adapter Swap Kit?
installation is straightforward and can be completed in about an hour. Simply remove the old
Why We Like This
• 1. This product is designed to simplify the engine swap process for LS1 Camaro to Truck conversions.• 2. It is a direct fit for LS1 Camaro water pumps, and also works with LS3 and LQ4 water pumps.• 3. This product is CNC machined from high quality billet aluminum for precision and durability.• 4. It includes all necessary hardware for a complete installation.• 5. Made in the USA.
Additional Product Information
| Color | Aluminum |
| Height | 1.8 Inches |
| Length | 9.3 Inches |
The CNRAQR LS Water Pump Spacers kit Adapter Swap Kit Compatible with Camaro LQ4 LS1 5.3l LSX LQ9 LS6 L33 LS2 Engine Series is a great way to convert your truck’s water pump to an LS1 car water pump. These spacers are made of high quality aluminum alloy and are durable and reliable. They are easy to install and will keep the alignment perfectly. The installation is simple and does not require any complicated operations. We provide a two-month return service for this product. If you have any questions, please contact us and we will be happy to help.
Common Questions on CNRAQR LS Water Pump Spacers kit Adapter Swap Kit Compatible with Camaro LQ4 LS1 5.3l LSX LQ9 LS6 L33 LS2 Engine Series
• What is the maximum height of the spacer adapter?2.00 inches
• What is the inside diameter of the spacer adapter?
0.87 inches
• What is the outside diameter of the spacer adapter?
1.50 inches
• How many spacers are included in the kit?
There are four spacers included in the kit.
Why We Like This
• Strong Compatibility• High Quality Material• Powerful Performance• Easy To Install• Quality Service
X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy Small Block 0.7″ Thick Adapter with 1/8″ NPT Steam Port Plug Silver Tone is one of the most popular water pump spacers on the market. This spacer is made from billet aluminum and is resistant to corrosion and rust. It is also precision machined to ensure a perfect fit. It has a 1/8″ NPT steam port provision in one of the spacers. This spacer kit is designed to help you convert your truck water pump to an LS1 car water pump. It will also help you retain your truck style accessories while using an LS1 water pump. This spacer kit is a great way to install low profile intake manifolds easily and possibly get simpler radiator hose routing.
Common Questions on X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy Small Block 0.7″ Thick Adapter with 1/8″ NPT Steam Port Plug Silver Tone
• What are the dimensions of the X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy Small Block 0.7″ Thick Adapter with 1/8″ NPT Steam Port Plug Silver Tone?The dimensions of the X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy Small Block 0.7″ Thick Adapter with 1/8″ NPT Steam Port Plug Silver Tone are 3.54 x 3.54 x 0.71 inches.
• What is the weight of the X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy Small Block 0.7″ Thick Adapter with 1/8″ NPT Steam Port Plug Silver Tone?
The weight of the X AUTOHAUX 1 Set For LS Water Pump Spacers Adapter Swap Kit 551690-71 for Camaro LSX for LS1 LS2 LQ4 Engine for Chevy
Why We Like This
• Suit for LS1 for Camaro water pump to for LS truck engine block 1998 2002, for Chevy small Block Gen III/IV (for LS based engine) V8 60L 1999 2019, for Chevy small block Gen III/IV ( for LS based engine) V8 48L 1999 2017, for Chevy small block Gen III/IV (for LS based engine) V8 53L 1999 2014.• Water Pump Spacers Adapter Kit for Camaro LQ4 for LS1 53L LSX LQ9 LS6 L33 LS2 LH6 L92 L76 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L757515 LC59 Engine Series• It can be bolted to all for LS engines, currently running for LS Truck (or LS3 for Camaro) crank pulley• For mounting 1998 2002 for LS1 for Camaro (or for GTO any year) water pumps onto for LS Truck or SUV engines.• Help to converting the truck water pump to for LS1 car water pump• With a 1/8″ NPT steam port provision in one of the spac
When it comes to LS swaps, one of the most popular questions is what water pump to use. The answer is, it depends on what engine you have. If you have an LS1 or LS3, then you can use the stock water pump. However, if you have an LS2 or LS6, then you’ll need an aftermarket water pump.
For those with an LS2 or LS6, the Demotor Performance 3/4″ Thick LS Water Pump Spacers Adapter Swap Kit is the perfect solution. This kit includes everything you need to swap out your water pump, including two adapter brackets, four gaskets, and six bolts. The bolts are the same size as the factory bolts, so there’s no need to worry about compatibility issues.
The biggest benefit of this kit is that it keeps the belt aligned. The spacers are the exact size required for this combination, so you won’t have to worry about the belt coming off or misalignment. Plus, the kit can be bolted to the crank pulleys of all LS engines, so it’s compatible with LS trucks and LS3 Camaros.
For a professional installation, we recommend taking the kit to a qualified mechanic. But if you’re confident in
Common Questions on DEMOTOR PERFORMANCE 3/4 Thick LS Water Pump Spacers Adapter Swap Kit For Chevy Camaro LS1 LSX LQ4 LQ9 Billet Aluminum
• What are the dimensions of the LS Water Pump Spacers Adapter?The dimensions of the LS Water Pump Spacers Adapter are 3/4″ thick.
• What is the minimum distance the spacer should be installed from the water pump?
The minimum distance the spacer should be installed from the water pump is 1/8″.
• What is the maximum distance the spacer can be installed from the water pump?
The maximum distance the spacer can be installed from the water pump is 1″.
• What are the benefits of installing the LS Water Pump Spacer?
The benefits of installing the LS Water Pump Spacer include better flow and increased cooling efficiency.
Why We Like This
• • 1. Allows for LS1 Camaro/Truck Swap• 2. Made from billet aluminum• 3. Comes with 2 adapter brackets, 4 gaskets, and 6 bolts• 4. Keeps the belt aligned• 5. Can be bolted to the crank pulleys of all LS engines
Benefits of Ls Water Pump Spacers
In order to maintain your car’s performance, it is important to keep its engine properly lubricated. Lubrication helps reduce friction between moving parts and prevents wear and tear. An engine needs a good supply of oil to function properly. Most engines have an oil pump that circulates the oil throughout the engine.
Installing an ls water pump spacer can help improve your car’s oil circulation, which in turn can lengthen the life of your engine and improve its performance.
Buying Guide for Best Ls Water Pump Spacers
LS water pump spacers are designed to fit between the water pump and engine block on LS engines, creating an additional space for clearance and providing extra protection for the water pump. There are many different brands and sizes of LS water pump spacers available, so it is important to choose one that will fit your particular engine setup and provide the desired level of clearance. Factors to consider when selecting an LS water pump spacer include:
-Spacer size (thickness): Depending on the amount of clearance needed, you will want to choose a spacer that is either 3/4″ or 1″ thick. If you are unsure, err on the side of a thicker spacer as they can always be trimmed down if needed but a thin spacer will not provide enough clearance if more is required.
-Mounting holes: Most spacers will have four mounting holes that line up with those on the water pump. Some also have an extra set of mounting holes in between these for added stability or to allow for different bolt configurations.
-Materials: Spacers can be made from aluminum, plastic, or steel. Aluminum is the lightest weight option but may not provide as much strength as the other two materials. Plastic is less expensive than aluminum but also not as strong. Steel is the strongest material but also the heaviest so it may not be ideal for every application.
Frequently Asked Question
What is the best LS water pump spacer?
There is no definitive answer to this question as it depends on the specific application and desired results. Some common LS water pump spacers include those made from aluminum, billet aluminum, and steel. Each material has its own advantages and disadvantages that must be considered before making a decision.
What are the benefits of using an LS water pump spacer?
An LS water pump spacer is used to create a larger water pump pulley, which in turn increases water pump output. This can be beneficial in a number of ways, including increased cooling capacity, increased water pressure, and increased flow.
How does an LS water pump spacer work?
LS water pump spacers are designed to create a larger water pump pulley diameter to prevent the water pump from over-speeding and failing.
What are the installation instructions for an LS water pump spacer?
There are a few different ways to install an LS water pump spacer. The most common way is to use the bolts that come with the spacer to bolt it to the water pump. You will need to use a drill to make a pilot hole in the water pump for the bolts. Another way to install the spacer is to use JB Weld to attach it to the water pump. This method is a little more permanent, but it will hold the spacer in place better.
What are some tips for using an LS water pump spacer?
Some tips for using an LS water pump spacer are to make sure that the spacer is the correct size for your pump, to clean the pump and spacer before installation, and to use new gaskets and bolts when installing the spacer.
Conclusion
You have been looking for the best ls water pump spacers and finally you have found it. This product is amazing and it will definitely help you with your problem. You will not be disappointed with this product, so go ahead and buy it now.