Best Lowering Blocks For Leaf Springs
There are a few things to consider when choosing the best lowering blocks for your leaf springs. The first is the material they’re made from. Lowering blocks are typically made from either steel or aluminum. Steel is the more durable option, but aluminum is lighter and therefore can potentially provide a better ride.
The second thing to consider is the height of the lowering block. Different heights will provide different amounts of drop, so you’ll need to decide how low you want to go. Higher blocks will provide a greater drop, but may sacrifice some ride quality. Lower blocks will provide a smaller drop, but may improve ride quality.
Finally, you’ll need to decide how many lowering blocks you want to use. Using more than one block will lower your car further, but may also adversely affect ride quality. If you’re not sure how many to use, start with two and then experiment from there.
Lowering blocks are a great way to lower your car without breaking the bank.
Why Lowering Blocks For Leaf Springs Is Necessary?
A leaf spring is a suspension component in a vehicle that helps to smooth out the bumps as the car goes over them. The leaves are connected to each other and to the chassis of the car at either end. There are usually two or three leaves in a spring, although some can have as many as five.
The leaves are held together by steel hoops called U-bolts, which go around the circumference of the spring. The U-bolts also attach the springs to brackets on the axle or frame of the vehicle. Springs can be either mounted above or below the axle, depending on their design.
When a car hits a bump in the road, it causes an up and down movement ofthe chassis. This movement is transferred tothe leaf springs, which start to flex and bend. The flexibility ofthe leaves reduces impact harshness felt by passengers and helps protect vehicle components from damage caused by sudden jolts.
Over time, however, leaf springs can become fatigued and lose their ability tomaintain proper tension.
Our Top Picks For Best Lowering Blocks For Leaf Springs
Best Lowering Blocks For Leaf Springs Guidance
Speedway Motors Universal Leaf Spring Lowering Block Kit, 2 Inch
Speedway Motors’ 2″ lowering block kit is the perfect way to drop your car’s leaf spring rear suspension. The extruded aluminum lowering blocks are 2-1/2″ wide and 5″ long, and the U-bolts fit 3″ diameter axle housings and are 10″ long, making them versatile enough to fit a variety of applications. The U bolts are made of premium steel for durability and are zinc plated for corrosion resistance. This kit will lower the ride height on vehicles with the axle mounted on top of the leaf springs.
Common Questions on Speedway Motors Universal Leaf Spring Lowering Block Kit, 2 Inch
• What is the purpose of the Speedway Motors Universal Leaf Spring Lowering Block Kit, 2 Inch?The Speedway Motors Universal Leaf Spring Lowering Block Kit, 2 Inch is designed to lower the rear end of your vehicle by two inches.
• What is included in the kit?
The kit includes two lowering blocks, four bolts, and four washers.
• How do I install the kit?
Installation instructions are included with the kit.
Why We Like This
• Includes lowering blocks and U bolts• Extruded aluminum blocks• U bolts fit 3″ diameter axle housings• 10″ long U bolts• Zinc plated for corrosion resistance
Additional Product Information
| Height | 3 Inches |
| Length | 12 Inches |
| Weight | 7.02 Pounds |
1/2 Inch Aluminum Extruded Leaf Spring Lowering Block, Single
If you’re looking to make your car or truck just a little bit lower, or to raise the ride height on a leaf spring suspension, these 1/2 inch aluminum extruded lowering blocks are just what you need. Made from lightweight extruded aluminum, they’re stronger than billet and can withstand even the harshest environments. And because they’re universal, they can be used in a variety of applications where a 25″ wide x 5″ long block is sufficient.
So whether you’re looking to lower your ride height for a better look or performance, or to raise it for clearance or towing purposes, these lowering blocks will do the trick. And because they’re made from lightweight aluminum, they won’t add a lot of extra weight to your vehicle. So why not give them a try? You won’t be disappointed.
Common Questions on 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block, Single
• What is the width of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block?The width of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block is 2.5 inches.
• What is the length of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block?
The length of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block is 4.5 inches.
• What is the weight capacity of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block?
The weight capacity of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block is 1,500 pounds.
• What is the height of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block?
The height of the 1/2 Inch Aluminum Extruded Leaf Spring Lowering Block is 3 inches.
Why We Like This
• Lowers the ride height on leaf spring suspensions• Raises ride height on leaf spring suspensions• Made of lightweight extruded aluminum• Withstands harsh environments• Universal design
Additional Product Information
| Height | 2 Inches |
| Length | 6 Inches |
| Weight | 1 Pounds |
NEW SOUTHWEST SPEED RACING 1/2″ LEAF SPRING LOWERING BLOCKS FOR 2 1/2″ WIDE SPRINGS, LIGHTWEIGHT ALUMINUM, LEFT & RIGHT SIDE INCLUDED
Southwest Speed Racing’s 1/2″ Leaf Spring Lowering Blocks are the perfect way to lower your 2 1/2″ wide springs. These lightweight aluminum blocks are stackable, so you can combine them to get the height you want.
Common Questions on NEW SOUTHWEST SPEED RACING 1/2″ LEAF SPRING LOWERING BLOCKS FOR 2 1/2″ WIDE SPRINGS, LIGHTWEIGHT ALUMINUM, LEFT & RIGHT SIDE INCLUDED
• What is the width of the springs?Springs are 2 1/2″ wide.
• What is the weight of the blocks?
Blocks are lightweight aluminum.
• What is the height of the blocks?
Blocks are 1/2″ high.
• How many blocks are included?
Two blocks are included, one for the left side and one for the right side.
Why We Like This
• Pair of lower blocks included• For 2 1/2″ wide springs• Lightweight aluminum construction• Stackable design• Left and right side included
Additional Product Information
| Color | 1/2″ |
Aluminum Extruded Leaf Spring Lowering Block, 1 Inch – 2 PK
If you want to lower your ride, our aluminum extruded leaf spring lowering block is the way to go. Made from a lightweight aluminum alloy, it’s stronger than billet and features a 9/16″ diameter centering pin. It measures 1″ thick, 2-1/2″ wide, and 5″ long, and can be used on most leaf spring applications to adjust suspension height. U-bolts and hardware are available separately.
Common Questions on Aluminum Extruded Leaf Spring Lowering Block, 1 Inch – 2 PK
• What is the weight capacity of the aluminum extruded leaf spring lowering block?The aluminum extruded leaf spring lowering block has a weight capacity of 1,000 pounds.
• What is the block made of?
The block is made of aluminum.
• How do you install the block?
The block is installed by bolting it onto the leaf spring.
• What is the purpose of the block?
The purpose of the block is to lower the leaf spring and provide support.
• What is the dimensions of the block?
The dimensions of the block are 2 inches by 2 inches.
Why We Like This
• Forged from lightweight aluminum for increased strength• 1″ thick, 2 1/2″ wide, and 5″ in length• Features a 9/16″ diameter centering pin• Increases or decreases suspension height on most leaf spring applications• U bolts and hardware available separately
Additional Product Information
| Weight | 2 Pounds |
Belltech 6002 Lowering Block Kit
Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your vehicle by increasing the distance between the leaf spring and the axle. Lowering block kits are manufactured of high quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts, and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks. Lowering blocks are available to lower the rear of your vehicle in 1-, 2-, or 3-inch increments. Some lowering blocks also include a built-in 2-degree taper for drive line angle correction.
Common Questions on Belltech 6002 Lowering Block Kit
• What are the dimensions of the Belltech 6002 Lowering Block Kit?The dimensions of the Belltech 6002 Lowering Block Kit are 2.5″ x 3.25″ x 4.5″.
• What is the weight capacity of the lowering block?
The weight capacity of the lowering block is 1,000 lbs.
• What is the minimum height requirement for the lowering block?
The minimum height requirement for the lowering block is 4.5″.
• What is the maximum height requirement for the lowering block?
The maximum height requirement for the lowering block is 9.5″.
• How many lowered vehicles can the block support?
The lowering block can support two lowered vehicles.
Why We Like This
• 1. Lower your vehicle easily and inexpensively with Belltech Lowering Blocks.• 2. High quality extruded aluminum construction for superior strength.• 3. Available in 1, 2, or 3 inch increments to achieve desired lowered look.• 4. Also available with built in 2 degree taper for drive line angle correction.• 5. Complete kit comes with blocks, U bolts, Nyloc nuts, and washers.
Additional Product Information
| Color | Regular |
| Height | 4 Inches |
| Length | 13 Inches |
| Weight | 3 Pounds |
Benefits of Lowering Blocks For Leaf Springs
Lowering blocks are one of the simplest and most popular methods to lower your truck or car. They offer many benefits over other methods, including being very affordable and easy to install. In addition, they can be removed if you decide to raise your vehicle back up.
Lowering blocks work by effectively lowering the height of your leaf springs. This stops them from jacking up the rear end of your vehicle as much, which in turn lowers the center of gravity. As a result, you will enjoy improved handling characteristics and a smoother ride quality – two features that are always welcome on any lowered vehicle!
There is no doubt that lowering blocks offer many advantages over other methods of lowering your truck or car.
Buying Guide for Best Lowering Blocks For Leaf Springs
If you are looking for the best lowering blocks for your leaf springs, here are a few things to keep in mind:
– The blocks should be made of high-quality materials that can withstand wear and tear.
– They should be easy to install, so you don’t have to spend hours trying to figure out how to put them on.
– The blocks should be adjustable, so you can fine-tune the ride height of your vehicle.
– Make sure the blocks come with all the necessary hardware for installation.
Frequently Asked Question
What are some good brands of lowering blocks for leaf springs?
Some good brands of lowering blocks for leaf springs include Eibach, H&R, and Belltech.
What are some good features of lowering blocks for leaf springs?
Lowering blocks for leaf springs can improve the suspension of a vehicle and make it easier to control. They can also provide a more comfortable ride and improve the handling of a vehicle.
What are some good installation tips for lowering blocks for leaf springs?
There are a few things to keep in mind when lowering blocks for leaf springs: 1. Make sure the block is properly secured in place. This can be done by using U-bolts or by welding the block to the spring.2. Be careful not to over-tighten the U-bolts or welds, as this can damage the leaf springs.3. Make sure the blocks are of the same height to avoid uneven wear on the springs.4. Check the suspension regularly to make sure the blocks are still securely in place and that there is no excessive wear on the springs.
What are some good ways to lower a vehicle using lowering blocks for leaf springs?
Some good ways to lower a vehicle using lowering blocks for leaf springs include: -Using a taller block in the front and a shorter block in the rear-Using two different size blocks in the front or rear-Using a thicker block in the front and a thinner block in the rear-Using a stiffer block in the front and a softer block in the rear
What are some things to watch out for when using lowering blocks for leaf springs?
Some things to watch out for when using lowering blocks for leaf springs are: 1. Make sure the blocks are the correct size for your leaf springs. 2. Make sure the blocks are properly secured to the leaf springs. 3. Make sure the blocks do not lower the vehicle too much, as this can cause problems with the suspension and handling. 4. Make sure the blocks do not raise the vehicle too much, as this can also cause problems with the suspension and handling.
Conclusion
If you are looking for a product that will lower your leaf springs, then I would highly recommend these blocks. They are made of high-quality materials and they are very easy to install. Plus, they are backed by a 100% satisfaction guarantee, so you can be sure that you will be happy with your purchase.