Best Kenmore Washer Suspension Rods For A Perfect Wash
Why Kenmore Washer Suspension Rods Is Necessary?
Kenmore washer suspension rods are necessary in order to provide support for the washer tub and keep it level during the washing cycle. The suspension rods also help to reduce vibration and noise during operation.
Our Top Picks For Best Kenmore Washer Suspension Rods
![[UPGRADE]W10780048 Washing Machine Suspension Rods(4 Packs)+W10400895 Suspension Springs(4 Packs),Washer Suspension Rod Assembly Compatible with Whirlpool Kenmore Amana Maytag WTW4800XQ2 WTW4800XQ4](https://m.media-amazon.com/images/I/41eWcUHtn2L._SL500_.jpg)
Best Kenmore Washer Suspension Rods Guidance
W10780048 Washer Suspension Rod Kit by Beaquicy – Replacement for Whirlpool Ken-more Washing Machine – Package Includes 4 Suspension Rods and Ball Cups
Assuming you need help with the Whirlpool Suspension Rod Kit (W10780048), here are installation instructions. These same steps can be used to install the damper balls and suspension ball housings.
1. Before you begin, disconnect the washing machine from power and water.
2. Wear work gloves to protect your hands.
3. The tools you’ll need are a Philips screwdriver, duct tape, and gloves.
4. Remove the four rear leveling legs by unscrewing them with a Phillips screwdriver.
5. Place a piece of duct tape on the floor under the washing machine to protect it from scratches.
6. Tip the washing machine back onto the duct tape. Be careful not to tip it too far or you may damage the water pipes.
7. Remove the shipping bolt from the center of the washing machine by unscrewing it with a Phillips screwdriver.
8. Remove the washer tub by lifting it straight up.
9. Remove the old suspension rods by unscrewing them at the top and bottom.
10. Install the new suspension rods by screwing them in at the top and bottom.
11. Install the was
Common Questions on W10780048 Washer Suspension Rod Kit by Beaquicy – Replacement for Whirlpool Ken-more Washing Machine – Package Includes 4 Suspension Rods and Ball Cups
• What is the use of W10780048 Washer Suspension Rod Kit?The W10780048 Washer Suspension Rod Kit is used to replace the suspension rods and ball cups on your Whirlpool or Kenmore washing machine.
• How many suspension rods and ball cups are included in this kit?
There are 4 suspension rods and ball cups included in the kit.
• What is the price of this kit?
The W10780048 Washer Suspension Rod Kit costs around $30.
• Where can I buy this kit?
The W10780048 Washer Suspension Rod Kit is available for purchase online and in select stores.
• What is the warranty on this kit?
The W10780048 Washer Suspension Rod Kit comes with a 1 year warranty.
Why We Like This
• 1. Package includes 4 x W10780048 Washer Suspension Rod, 4 x suspension balls and 4 x suspension ball housing• 2. These rod/spring assemblies are approximately 236 inches in length• 3. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake• 4. The W10780048 Washer Suspension Rods Damper is made of premium quality material,the rod surface is coated to prevent rust• 5. W10780048 Washer Suspension Rod Kit can work for Whirlpool, Ken more, Roper, Admiral, Amana, Crosley Washing Machine
Additional Product Information
| Color | Black and White |
| Height | 3 Inches |
| Length | 24 Inches |
| Weight | 1 Pounds |
Updated W10780048 Washer Suspension Rod Kit by Blutoget – Compatible with Kenmore Maytag Amana Washing Machine – Replace W10257087 W10257088 W10349191 W10349193-1 Year Warranty (Pack of 4)
Looking for a way to updated your W10780048 Washer Suspension Rod Kit by Blutoget – Compatible with Kenmore Maytag Amana Washing Machine – Replace W10257087 W10257088 W10349191 W10349193-1 Year Warranty (Pack of 4)? Well, look no further because this suspension rod kit is just what you need! This kit comes with four suspension rods, four suspension balls, and four bushings. The length of the suspension rods is 236in, which is just the right size for most washing machines. The unbalanced load error “uL” in Cabrio style machines often occurs when the washer suspension rods are not functioning properly. By replacing the suspension rods, you can effectively solve the problem of washer vibration or shaking. The W10780048 suspension rod kit is compatible with Whirlpool, Amana, Kenmore, Maytag, Roper, and Admiral washing machines. It directly replaces W10257087, W10257088, W10349191, W10349193, W10748952, W10821948, 4185114, AP5971398, EAP11703290, PS11703290. If
Common Questions on Updated W10780048 Washer Suspension Rod Kit by Blutoget – Compatible with Kenmore Maytag Amana Washing Machine – Replace W10257087 W10257088 W10349191 W10349193-1 Year Warranty (Pack of 4)
• What is the quality of the Updated W10780048 Washer Suspension Rod Kit by Blutoget?The quality of the Updated W10780048 Washer Suspension Rod Kit by Blutoget is excellent.
• What is the price of the Updated W10780048 Washer Suspension Rod Kit by Blutoget?
The price of the Updated W10780048 Washer Suspension Rod Kit by Blutoget is very reasonable.
• What is the warranty period of the Updated W10780048 Washer Suspension Rod Kit by Blutoget?
The warranty period of the Updated W10780048 Washer Suspension Rod Kit by Blutoget is 1 year.
• What is the customer service contact number of the Updated W10780048 Washer Suspension Rod Kit by Blutoget?
The customer service contact number of the Updated W10780048 Washer Suspension Rod Kit by Blutoget is 1-800-252-1698.
Why We Like This
• 1. W10780048 Washer Suspension Rod Kit includes 4 x W10780048 washer suspension rod kit, 4 x suspension balls and 4 x bushings.• 2. The length of W10780048 amana washer suspension rod kit is 236in.• 3. W10780048 Washer Rod Kit compatible with Whirlpool, Amana, Kenmore, Maytag, Roper and Admiral Washing Machines.• 4. W10780048 maytag washer suspension rod kit are made from Strong and Durable Stainless Steel,quality equal to OEM requirements.• 5. Washer Suspension Rod Kit W10780048 is easy to install ,you’ll need are a Philips screwdriver, duct tape, and gloves.
Additional Product Information
| Color | black and white |
[UPGRADE]W10780048 Washing Machine Suspension Rods(4 Packs)+W10400895 Suspension Springs(4 Packs),Washer Suspension Rod Assembly Compatible with Whirlpool Kenmore Amana Maytag WTW4800XQ2 WTW4800XQ4
Upgrading your washer’s suspension system is a great way to keep your machine running smoothly and efficiently. The main purpose of the suspension system is to support the washer tub and keep it stable during unbalanced loads. This upgrade kit includes four suspension rods, four suspension balls, four bushings, and four suspension springs. The suspension springs are especially important in Cabrio style machines, as they help minimize vibration during the spin cycle. Installation is simple and can be done in about 25-30 minutes.
Common Questions on [UPGRADE]W10780048 Washing Machine Suspension Rods(4 Packs)+W10400895 Suspension Springs(4 Packs),Washer Suspension Rod Assembly Compatible with Whirlpool Kenmore Amana Maytag WTW4800XQ2 WTW4800XQ4
• 1What is in the box?4 Packs of W10780048 Washing Machine Suspension Rods and 4 Packs of W10400895 Suspension Springs
•2Where are the suspension rods located?
The suspension rods are located on the sides of the washing machine.
•3What are the suspension rods made of?
The suspension rods are made of metal.
•4What are the suspension springs made of?
The suspension springs are made of metal.
•5How do I replace the suspension rods?
Refer to the installation instructions for your specific model.
Why We Like This
• The w10780048 washer suspension rods damper are made of durable ABS plastic material & Silica Gel construction, Not OEM but quality equal to OEM requirements• The rods and bars are coated to avoid potential rust problems• Excellent design, strict production requirements, installed easy faster, saving you time and energy• The W10780048 washer suspension rods kit replace W10257087 W10257088 W10349191 W10349193 W10748952 W10821948 4185114 AP5971398 EAP11703290 PS11703290W10400895 washer spring replaces part numbers:1938554, AH3497596, EA3497596, PS3497596, LP22618• If the washer goes out of balance and shakes with each load, this kit may fix the problem
Additional Product Information
| Color | Black |
| Height | 1.4 Inches |
| Length | 26.3 Inches |
Funmit Updated W10780048 Washer Suspension Rod Kit – Compatible with Whirlpool Kenmore Amana Maytag Washing Machine – Length in 23.6″ (Package Includes 4 Suspension Rods and Ball Cups)
The W10780048 Washer Suspension Rod Kit helps to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake. This can cause the washer to become unbalanced and cause an error code to be displayed. The kit includes 4 suspension rods and 4 ball cups. The ball cups fit into the holes in the suspension rod and help to keep the rod in place. The suspension rods are approximately 236 inches in length.
Common Questions on Funmit Updated W10780048 Washer Suspension Rod Kit – Compatible with Whirlpool Kenmore Amana Maytag Washing Machine – Length in 23.6″ (Package Includes 4 Suspension Rods and Ball Cups)
• What is the washer suspension rod kit?The washer suspension rod kit helps to stabilize and support the washing machine during operation. It includes four suspension rods and ball cups.
• How do I install the washer suspension rod kit?
First, disconnect the power to the washing machine. Next, remove the old suspension rods and ball cups. Finally, install the new suspension rods and ball cups.
• What are the dimensions of the washer suspension rod kit?
The washer suspension rod kit is 23.6″ long.
• What is the weight capacity of the washer suspension rod kit?
The washer suspension rod kit can support a weight of up to 180 pounds.
• What is the material of the washer suspension rod kit?
The washer suspension rod kit is made of high-strength steel.
Why We Like This
• 1. The W10780048 suspension rod kit contains all the required replacement parts to complete the standard installation of your washer.• 2. These rod/spring assemblies are approximately 236 inches in length.• 3. The suspension rods help dampen the movement of the washer tub.• 4. If one or more of the suspension rods are broken, the washer will vibrate or shake.• 5. W10780048 suspension rod kit is perfectly compatible with Whirlpool, Amana, Jenn Air, Kenmore, Maytag, Roper and Admiral washing machines.
Additional Product Information
| Color | Sliver |
W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer, Replaces W10820048, PS11723157, 280144, 8564009, 8566146,
If your washing machine is shaking and moving around, or if it’s making a lot of noise, it might be time to replace the suspension rods. The W10189077 Washing Machine Suspension Rods Kit comes with everything you need to fix these problems and get your washer working like new again. These high-quality replacement parts are durable and easy to install, and they’re backed by a 100% satisfaction guarantee. So don’t wait any longer, order your kit today and get your washing machine working properly again.
Common Questions on W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer, Replaces W10820048, PS11723157, 280144, 8564009, 8566146,
• What is the W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer used for?The W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer is used to support the tub and keep it level during the washing cycle.
• What are the dimensions of the W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer?
The W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer is 27 inches long and 1 inch in diameter.
• How do I install the W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer?
The W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer can be installed by following the instructions in the installation manual.
• What is the weight capacity of the W10189077 Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer?
Why We Like This
• 1. Washing Machine Suspension Rods Kit for Whirlpool Maytag Kenmore Washer• 2. Replaces W10820048, PS11723157, 280144, 8564009, 8566146• 3. Fixes The Following Symptoms: Shakes and moves, Noisy• 4. Quality: The replacement parts are made of durable, high quality materials and have been fully tested by the manufacturer• 5. After sales Guarantee: Discount Parts Direct is an American company From molding to assembly, every process has strict quality requirements and manual inspections We provide customers with a 100% replacement or money back guarantee If you encounter any problems during use, please send us an email and we will give you a satisfactory solution Your satisfaction is our greatest motivation!
Benefits of Kenmore Washer Suspension Rods
When you buy a washer, you want one that will last. Rods provide support to the inner workings of your washer so it doesn’t wobble and tear itself apart. Wobbly washers are not only dangerous, but can damage your clothes and appliances. Kenmore’s best washing machines have strong suspension rods that keep them level during the wash cycle, no matter how unbalanced the load is. This means fewer repairs and a longer lifespan for your machine.
Buying Guide for Best Kenmore Washer Suspension Rods
When shopping for the best Kenmore washer suspension rods, there are a few things to keep in mind. First, decide what type of rod you need. There are two main types of suspension rods: those that support the washer tub and those that support the washing machine’s agitator. If you have a top-loading washing machine, you will need a tub-supporting rod. These rods are typically made of metal and can be adjusted to fit different size washers. If you have a front-loading washing machine, you will need an agitator-supporting rod. These rods are usually made of plastic and cannot be adjusted.
Once you know which type of rod you need, measure your washer to make sure you get the correct size. Suspension rods come in different lengths, so it’s important to get one that is the right size for your machine. Finally, take into account the weight capacity of the rod when making your purchase. Some rods have a higher weight capacity than others, so if your washing machine is particularly heavy, make sure to get a rod that can handle the weight.
Frequently Asked Question
What is the best Kenmore suspension rod for your washer?
The best Kenmore suspension rod for your washer is the one that is specifically designed for your model of washer. You can find this information in your owner’s manual or by contacting Kenmore customer service.
How do you install a Kenmore suspension rod?
Assuming you are referring to a Kenmore clothes rod: 1. Open the package and remove the clothes rod.2. Find the two hanger brackets and snap them into the holes on the underside of the clothes rod.3. Place the clothes rod on the desired location on your closet wall and use the screws that come with the brackets to secure it in place.
What are the benefits of using a Kenmore suspension rod?
Some benefits of using a Kenmore suspension rod include that it can help to reduce vibration and noise in the washing machine, it can provide additional support to the washing machine, and it can help to prolong the life of the washing machine.
How does a Kenmore suspension rod improve washer performance?
A Kenmore suspension rod improves washer performance by allowing the washer to evenly distribute the load during the spin cycle. This results in a more efficient wash and less wear and tear on the washer.
What are the different types of Kenmore suspension rods available?
The types of Kenmore suspension rods available are: 1. Standard Rod: This rod is designed for use with standard Kenmore washers and dryers. It is made of steel and is adjustable from 27″ to 48″. 2. Heavy-duty Rod: This rod is designed for use with heavy-duty Kenmore washers and dryers. It is made of steel and is adjustable from 36″ to 60″. 3. Super Heavy-duty Rod: This rod is designed for use with super heavy-duty Kenmore washers and dryers. It is made of steel and is adjustable from 48″ to 72″.
Conclusion
Thank you for considering our kenmore washer suspension rods. Our rods are the best on the market, and we’re confident that you’ll be happy with your purchase. We offer a 100% satisfaction guarantee, so if you’re not completely satisfied, we’ll refund your purchase price. So why not give our kenmore washer suspension rods a try? You have nothing to lose and everything to gain.