Best GM Single Wire Coolant Temperature Sensor Connector
Why Gm Single Wire Coolant Temperature Sensor Connector Is Necessary?
Most engines have a coolant temperature sensor (CTS) that sends a signal to the engine control unit (ECU). The ECU uses this signal to determine how much fuel to inject and when to fire the spark plugs. The CTS is usually located in the engine block, near the thermostat.
The CTS is generally a two-wire sensor, with one wire going to ground and the other going to the ECU. However, some vehicles have a single-wire CTS, with both wires going to the ECU. In this case, it’s important to use a best gm single wire coolant temperature sensor connector so that there’s no chance of mixing up the wires and causing problems with your vehicle’s electrical system.
Our Top Picks For Best Gm Single Wire Coolant Temperature Sensor Connector
Best Gm Single Wire Coolant Temperature Sensor Connector Guidance
If you’re looking for a replacement for your GM coolant temperature switch connector, pigtail gauge temp sending unit, or are simply troubleshooting an issue with your vehicle’s coolant temperature sensor, this 1-wire compatible connector from Michigan Motorsports is a great option. It’s compatible with a wide range of GM vehicles from 1992-2003, including the LT1 Camaro Firebird, various TBI and Vortec trucks, and many more. Installation is easy, and it’s a direct replacement for the P/N 25037332, 21377. So if you’re experiencing issues with your coolant temperature sensor, or just want a quality replacement connector, this is a great choice.
Common Questions on Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit
• What is the part number for the Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit?The part number is GMCTSW-1
• What is the price of the Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit?
The price is $19.99
• What is the model number of the Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit?
The model number is GMCTSW-1
• What is the weight of the Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit?
The weight is 0.1 lbs.
• What is the dimensions of the Michigan Motorsports 1 Wire GM Coolant Temperature Switch Connector Pigtail Gauge Temp Sending Unit?
The dimensions are 4″ x 2″ x 1″
Why We Like This
• 1. Direct Fit Replacement• 2. 4 Way Flat• 3. High Quality• 4. Durable• 5. Weatherproof
Muzzys PT2386 T56 Manual Transmission Wire Harness Connector Pigtail VSS Vehicle Speed Temperature Coolant Knock Sensors FITS GM LS1 and LT1, Replaces ACDelco PT 2386, Also Fits Jeep Cherokee Wrangler. PT2386 is a direct fit replacement for the GM T56 Transmissions. It includes the vehicle speed sensor (VSS), temperature, coolant, knock sensor, and backup lamp pigtails. The high quality TXL wire is the correct gauge and is color coded for an easy installation. ThePT2386 also fits various Jeep applications.
Common Questions on Muzzys PT2386 T56 Manual Transmission Wire Harness Connector Pigtail VSS Vehicle Speed Temperature Coolant Knock Sensors FITS GM LS1 and LT1, Replaces ACDelco PT 2386, Also Fits Jeep Cherokee Wrangler
• What is the function of the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail?The PT2386 T56 Manual Transmission Wire Harness Connector Pigtail is used to connect the wire harness to the vehicle speed sensor, temperature sensor, coolant sensor, and knock sensor. This allows for accurate monitoring of the engine parameters by the ECU.
• Why is it necessary to replace the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail?
Over time, the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail can become worn or damaged, causing inaccurate readings from the sensors. Replacing the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail will ensure accurate sensor readings and optimal engine performance.
• What vehicles is the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail compatible with?
The PT2386 T56 Manual Transmission Wire Harness Connector Pigtail is compatible with GM LS1 and LT1 engines, as well as Jeep Cherokee and Wrangler models.
• How do I install the PT2386 T56 Manual Transmission Wire Harness Connector Pigtail?
Why We Like This
• Fits GM LS1 and LT1• Replaces ACDelco PT 2386• Also fits Jeep Cherokee Wrangler• Uses Delphi/Packard connectors, terminals, and seals• Made with factory correct cross linked polyethelene high temperature TXL wire
The GM LS1 Coolant Temperature Sensor (CTS) is a key component in your car’s cooling system, and its failure can lead to some serious problems. Luckily, if your CTS goes bad, you can replace it with a new one from Wholesale Sensors.
The CTS is responsible for measuring the temperature of the coolant in your engine, and it sends this information to the car’s computer. This allows the computer to adjust the engine’s temperature accordingly. If the CTS fails, it can cause the engine to overheat, which can lead to serious engine damage.
Wholesale Sensors offers replacement CTS connectors for GM vehicles that are backed by a 12-month warranty. This means that if your connector fails within a year of purchase, we will replace it free of charge.
We understand that a failed CTS can be a serious issue, so we want to make sure that you have the best possible replacement. That’s why we offer a quality product at a competitive price, and we stand behind it with a 12-month warranty.
If you need a replacement CTS for your GM vehicle, look no further than Wholesale Sensors.
Common Questions on Wholesale Sensors Replacement for GM LS1 Coolant Temperature Sensor CTS Connector Harness 3-Wire 12 Month Warranty
• What is the name of the product?Wholesale Sensors Replacement for GM LS1 Coolant Temperature Sensor CTS Connector Harness 3-Wire 12 Month Warranty
• What is the warranty period for this product?
This product has a warranty period of 12 months.
• What is the return policy for this product?
This product can be returned within 30 days for a full refund.
• How long does it take for this product to ship?
This product typically ships within 1-2 business days.
Why We Like This
• Wholesale sensors replacement for GM LS1 coolant temperature sensor CTS connector harness 3 wire• USA manufacturer• 12 month warranty• Pigtail connector harness for GM vehicles• Replacement for Michigan Motorsports GM LS1 coolant temperature sensor CTS connector harness 3 wire
When it comes to engine temperature, precision is key. That’s why PICO designed the 5665PT GM Coolant Temperature Sending Unit. This unit is specifically calibrated for use with GM vehicles, and it provides accurate engine temperature readings to ensure that your engine is operating at peak efficiency.
The PICO 5665PT GM Coolant Temperature Sending Unit is easy to install, and it’s backed by a limited lifetime warranty. So you can rest assured that your engine is in good hands.
Common Questions on PICO 5665PT GM Coolant Temperature Sending Unit
• What is the part number for the GM coolant temperature sending unit?The part number is PICO 5665PT.
• What is the function of the GM coolant temperature sending unit?
The function of the GM coolant temperature sending unit is to provide an accurate reading of the engine coolant temperature to the electronic control unit.
• What is the typical operating temperature range for the GM coolant temperature sending unit?
The typical operating temperature range for the GM coolant temperature sending unit is -40°F to257°F (-40°C to 125°C).
• Where is the GM coolant temperature sending unit located?
The GM coolant temperature sending unit is located in the engine coolant passage, near the thermostat housing.
• What are the symptoms of a failing GM coolant temperature sending unit?
The symptoms of a failing GM coolant temperature sending unit are an engine that runs hot, a check engine light, and erratic engine temperature gauge readings.
Why We Like This
• 1. Pico’s commitment to quality ensures that every product is designed and manufactured to meet or exceed the customer’s expectations.• 2. Pico products are backed by a limited lifetime warranty.• 3. Pico products are easy to install and require no special tools or skills.• 4. Pico products are designed for durability and long life.• 5. Pico products are made in the USA.
Dorman’s Coolant Temperature Sensor Connector is designed to withstand the rigors of underhood temperatures and resistance to coolant and corrosion. The connector features an O-ring seal to prevent leaks and a double-sealed design to protect against moisture and contamination. Additionally, the connector is molded from a high-strength plastic for superior durability.
Common Questions on Dorman 85100 Coolant Temperature Sensor Connector
• What is the Dorman 85100 Coolant Temperature Sensor Connector?The Dorman 85100 Coolant Temperature Sensor Connector is a replacement for your vehicle’s original connector. It connects the coolant temperature sensor to the engine coolant temperature gauge.
• What are the benefits of replacing my vehicle’s coolant temperature sensor connector?
Replacing your coolant temperature sensor connector can help to improve the accuracy of your engine coolant temperature gauge. It can also help to prevent false readings and potential damage to your engine.
• How do I know if the Dorman 85100 Coolant Temperature Sensor Connector is compatible with my vehicle?
The Dorman 85100 Coolant Temperature Sensor Connector is compatible with most makes and models of vehicles. However, it is always best to consult your vehicle’s owner’s manual or an experienced automotive technician to be sure.
• Where can I purchase the Dorman 85100 Coolant Temperature Sensor Connector?
The Dorman 85100 Coolant Temperature Sensor Connector is available for purchase online and at many local auto parts stores.
• What is the warranty on the Dorman
Why We Like This
• 1. Dorman 85100 Coolant Temperature Sensor Connector is a high quality product.• 2. Package Dimensions: 152 L x 279 H x 203 W (centimeters).• 3. Package Weight : 0907 kilograms.• 4. Electrical Sockets.• 5. Country of Origin : China.
Additional Product Information
| Height | 1.2 Inches |
| Length | 4.9 Inches |
| Weight | 0.04 Pounds |
Benefits of Gm Single Wire Coolant Temperature Sensor Connector
There are many benefits of using the best gm single wire coolant temperature sensor connector. This connector is affordable and makes it easy to connect your coolant sensor to your cooling system. It is also easy to install and eliminates the need for extra wires in your engine compartment.
Buying Guide for Best Gm Single Wire Coolant Temperature Sensor Connector
If your vehicle has a single wire coolant temperature sensor connector, then you will want to purchase the best one that you can find. Here are a few things to look for when choosing a coolant temperature sensor connector:
1. Make sure that the connector is made from high-quality materials. This will ensure that it lasts for a long time and does not break easily.
2. Choose a connector that is easy to install. You do not want to spend hours trying to figure out how to install the connector only to have it fail on you later.
3. Find a coolant temperature sensor connector that comes with a warranty. This will protect you in case the connector breaks or malfunctions within a certain period of time after you purchase it.
Frequently Asked Question
What is the best GM single wire coolant temperature sensor connector?
There is no definitive answer for this question as there are a variety of different GM single wire coolant temperature sensor connectors on the market. Some of the more popular options include the ACDelco 12085484, the Dorman 904-107, and the Painless Wiring 70207. Ultimately, it is up to the individual to decide which connector is best for their needs.
Where can I find the best GM single wire coolant temperature sensor connector?
Some potential places to check would be auto parts stores, online retailers that sell auto parts, or even the dealership where you purchased your vehicle.
Who makes the best GM single wire coolant temperature sensor connector?
There is no definitive answer to this question as there are many manufacturers that produce GM single wire coolant temperature sensors. Some of the more popular brands include ACDelco, Dorman, and Gates. Ultimately, it is up to the consumer to decide which brand they prefer.
What are the features of the best GM single wire coolant temperature sensor connector?
The best GM single wire coolant temperature sensor connector should have a low resistance value, a high temperature rating, and a durable construction.
Why is the best GM single wire coolant temperature sensor connector the best?
The best GM single wire coolant temperature sensor connector is the best because it is made from high quality materials and it is designed to last.
Conclusion
If you are looking for a coolant temperature sensor connector that is durable and reliable, then the GM single wire coolant temperature sensor connector is the perfect choice for you. This connector is made of high-quality materials and is designed to withstand extreme temperatures. It is also corrosion resistant and has a low resistance rating, which makes it ideal for use in high performance applications.