The Ford Ranger Is Still The Best Spindle Lift
If you are in the market for a new suspension lift for your Ford Ranger, then you may be wondering about which brand or type of lift is best for you. When it comes to choosing a spindle lift for your Ranger, there are many things to consider including budget, off-road capabilities, and ride quality. In this article, we will discuss some of the best Ford Ranger spindle lifts on the market and help you decide which one is right for you.
Why Ford Ranger Spindle Lift Is Necessary?
The best ford ranger spindle lift is necessary in order to increase the ground clearance of your vehicle. This is especially beneficial if you frequently travel off-road or if you live in an area with a lot of snowfall. Additionally, a higher ground clearance can make it easier to navigate over obstacles and rough terrain.
Our Top Picks For Best Ford Ranger Spindle Lift
![MaxTrac K883042B Suspension Lift Kit 4 in. Front Lift 2 in. Rear Lift Front Lift Spindles/Rear Lift Shackles Supersedes PN[K883032] Suspension Lift Kit](https://m.media-amazon.com/images/I/411-NygjN3L._SL500_.jpg)
Best Ford Ranger Spindle Lift Guidance
If you’re looking to give your 2wd Ford Ranger a little extra height, then a set of our 4″ lift spindles is just what you need! These spindles will raise the front of your truck by 4″, giving you the clearance to run larger tires and take on tougher trails. Plus, they’re engineered to work with your factory coil spring suspension, so there’s no need for any costly or complicated modifications. So if you’re ready to take your Ranger to the next level, grab a set of our 4″ lift spindles and hit the road!
Common Questions on 01-10 FORD RANGER 2WD 4″ LIFT SPINDLES
• What is the brand of the product?FORD RANGER 2WD 4″ LIFT SPINDLES
• What is the name of the product?
FORD RANGER 2WD 4″ LIFT SPINDLES
• What is the weight of the product?
6.4 lbs
• What is the width of the product?
4 Inch
• What is the Warranty?
Limited Lifetime
Why We Like This
1. 4″ lift spindles for 2wd Ford Rangers
2. Only fits models with front coil spring suspension
3. Clears up to 31″ tires
4. Made in the USA
5. Lifetime warranty
Additional Product Information
| Height | 12 Inches |
| Length | 15 Inches |
If you’re looking to level out your 2001-2011 Ford Ranger 2WD with Coil Spring Suspension, then this WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles is just what you need. The front end features ductile cast iron spindles/knuckles for added strength and durability, while the rear end gets adjustable 15-2″ lift black powder coated shackles with zerk-grease fittings and pressed greaseable high grade poly bushings and metal sleeves. Please note that this kit is for 2WD models only and excludes models with Stabilitrak.
Common Questions on WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles compatible with 2001-2011 Ford Ranger 2WD with Coil Spring Suspension
• What is the WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles compatible with 2001-2011 Ford Ranger 2WD with Coil Spring Suspension?The WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles is a kit that is designed to level out your Ford Ranger. It comes with everything you need to get the job done, including spindles and shackles.
• How much does the WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles cost?
The WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles retails for around $200.
• How difficult is it to install the WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles?
The WULF 4″ Front 2″ Rear Leveling Lift Kit with Spindles & Shackles is not very difficult to install. However, it is always best to consult with a professional if you have any questions or concerns.
• Will the WULF 4″ Front 2″ Rear Leveling Lift
Why We Like This
• Lift kit provides 4″ of front and 2″ of rear suspension lift• Ductile cast iron spindles and knuckles for increased durability• Adjustable black powder coated rear shackles with zerk grease fittings• Pressed greaseable high grade poly bushings and metal sleeves included• Fast shipping and manufacturers lifetime warranty
Maxtrac Suspension (703030C) 01-10 Ford Ranger Edge 2WD 4″ Lift Spindles are the perfect way to add some extra height to your truck. These spindles will give you the clearance you need to tackle any terrain, while still providing a smooth ride.
These spindles are made out of high quality materials that are built to last. The powder coat finish will give your truck a tough look that will turn heads. With a simple bolt on installation, you will be able to get these spindles installed in no time.
Don’t miss out on this great opportunity to take your truck to the next level. Order your Maxtrac Suspension (703030C) 01-10 Ford Ranger Edge 2WD 4″ Lift Spindles today!
Common Questions on Maxtrac Suspension (703030C) 01-10 Ford Ranger Edge 2WD 4″ Lift Spindles
• What is the largest tire size that can be used with this spindle?32″ tires can be used with this spindle.
• Does this spindle require the use of a CV spline binding tool?
No, this spindle does not require the use of a CV spline binding tool.
• How much does this spindle weigh?
This spindle weighs approximately 9lbs.
• What is the construction of this spindle made from?
The construction of this spindle is cast iron.
Why We Like This
1. 4″ lift spindles for 01 10 Ford Ranger Edge 2WD trucks.
2. Made from high strength steel for durability.
3. Powder coated for corrosion resistance.
4. Installation instructions included.
5. Backed by a limited lifetime warranty.
Additional Product Information
| Height | 13 Inches |
| Length | 15 Inches |
MaxTrac K883042B Suspension Lift Kit 4 in. Front Lift 2 in. Rear Lift Front Lift Spindles/Rear Lift Shackles Supersedes PN[K883032] Suspension Lift Kit. Fits 2wd Non Stabilitrak Models ONLY.
The MaxTrac K883042B Suspension Lift Kit is the perfect way to give your 2wd Non Stabilitrak Model a little bit of extra lift. This kit includes a 4″ front lift, 2″ rear lift, front lift spindles, rear lift shackles, and all necessary hardware. This lift kit is a great way to improve the look of your truck, as well as its off-road performance.
Common Questions on MaxTrac K883042B Suspension Lift Kit 4 in. Front Lift 2 in. Rear Lift Front Lift Spindles/Rear Lift Shackles Supersedes PN[K883032] Suspension Lift Kit
• What is the height of the MaxTrac K883042B Suspension Lift Kit?The MaxTrac K883042B Suspension Lift Kit has a 4 in. front lift and 2 in. rear lift.
• What is the difference between the MaxTrac K883042B Suspension Lift Kit and the MaxTrac K883032 Suspension Lift Kit?
The MaxTrac K883042B Suspension Lift Kit supersedes the PN[K883032] Suspension Lift Kit.
Why We Like This
1. MaxTrac K883042B Suspension Lift Kit provides 4 inches of front lift and 2 inches of rear lift.
2. Front lift spindles and rear lift shackles are included.
3. Supersedes PN[K883032].
4. Fits 2wd Non Stabilitrak Models ONLY.
5. Easy installation.
Additional Product Information
| Height | 12 Inches |
| Length | 20 Inches |
Looking to give your truck a little boost without breaking the bank? Check out our 4″ Front Lift Spindles! Fits 2001-2010 Two Wheel Drive Ranger Trucks with a coil spring front suspension, our spindles will lift your front end 4″. Bearing spud is pressed in, not bolted in for added durability, and they’re E-coated for long lasting protection. Plus, they utilize your factory wheel bearings so you know they’ll fit just right. Give your truck the lift it needs without breaking the bank. Order your set today!
Common Questions on 4″ Front Lift Spindles Fits 2001-10 Ranger 4×2 Truck
• What is the function of a spindle on a 4×2 truck?The spindle is responsible for holding the wheels in place and allowing them to rotate freely.
• What are the benefits of upgrading to a 4″ spindle?
The main benefit of upgrading to a 4″ spindle is the increased ground clearance that it provides. This can be useful for driving over rough terrain or for clearing obstacles in the path.
• How do I install a 4″ spindle on my truck?
Installation instructions can vary depending on the specific model of truck. However, in general, the spindle should be attached to the suspension system and the wheels should be attached to the spindle.
• What are the consequences of not properly installing a 4″ spindle?
If a 4″ spindle is not properly installed, it could result in the wheels becoming detached from the truck while driving. This could obviously lead to a serious accident.
Why We Like This
1. Lifts front end 4″ for a total of 4″ of ground clearance
2. Pressed in bearing spud prevents bolt loosening
3. E coated for long lasting protection against rust and corrosion
4. Factory wheel bearings provide a smooth ride
5. Easy installation with no special tools required
Benefits of Ford Ranger Spindle Lift
The best ford ranger spindle lift can offer many benefits for your vehicle. It can improve the look of your truck and also help with the resale value. There are many different brands and types of spindle lifts available, so you will want to do some research to find the one that is right for you and your truck.
A spindle lift can give your truck a more aggressive appearance, which can be appealing if you use your truck for off-roading or other activities where looks matter. It can also help increase the resale value of your vehicle because it makes it more desirable to potential buyers. Spindle lifts typically come in kits that include all of the necessary hardware, so they are relatively easy to install yourself if you have some basic mechanical skills.
Buying Guide for Best Ford Ranger Spindle Lift
When it comes to lifted trucks, there are a lot of things to consider – how much lift do you need, what kind of terrain will you be driving on, and of course – what’s the best lift for your Ford Ranger? In this guide, we’ll take a look at some of the best spindle lifts for Ford Rangers, so you can make an informed decision when it comes time to giving your truck some extra height.
Spindle lifts are a popular option for those looking to lift their Ford Ranger. They provide a significant amount of lift without needing to make any modifications to the truck’s suspension, which means they can be installed relatively easily. And because they don’t require any cutting or welding, they can be removed just as easily – making them ideal for those who want the option to return their truck to stock height at some point down the line.
When choosing a spindle lift for your Ford Ranger, it’s important to consider how much lift you actually need. If you plan on spending most of your time on paved roads, then a 2-inch or 3-inch Lift should suffice. However, if you anticipate spending more time off-road (or live in an area with particularly rough roads), then a 4-inch or higher Lift may be necessary. It’s also worth considering the maximum tire size that your chosen spindle lift will accommodate – especially if you have plans to upgrade your tires in the future.
Once you have an idea of how much lift you need and what tire size you want to use, it’s time to start shopping around for the best deal on a spindle lift kit for your Ford Ranger. There are many reputable brands out there that offer quality products at reasonable prices – so do some research and compare prices before making your final decision. And remember, while cost is important, it shouldn’t be the only factor considered when choosing a spindle kit – make sure that any product you purchase is backed by a good warranty in case something goes wrong down the road.
Frequently Asked Question
What is the best Ford Ranger spindle lift?
There is no definitive answer to this question as it depends on personal preferences and what you plan to use your Ranger for. Some people might prefer a spindle lift that provides a more aggressive look, while others might prefer one that offers a more subtle appearance. Ultimately, it is up to the individual to decide what the best Ford Ranger spindle lift is for them.
What are the benefits of a Ford Ranger spindle lift?
There are many benefits to a Ford Ranger spindle lift. Some of the benefits include improved ground clearance, better suspension, improved handling, and a more aggressive look.
What are the best features of a Ford Ranger spindle lift?
Some of the best features of a Ford Ranger spindle lift include its ability to provide a comfortable ride, its smooth handling, and its great fuel economy.
How does a Ford Ranger spindle lift improve ground clearance?
A Ford Ranger spindle lift improves ground clearance by raising the suspension. This allows the truck to clear obstacles more easily and reduces the chance of getting stuck.
How does a Ford Ranger spindle lift improve driving comfort?
A Ford Ranger spindle lift improves driving comfort by providing a smoother ride and improved handling. The spindle lift also raises the vehicle’s center of gravity, which improves stability and reduces body roll.
Conclusion
If you’re in the market for a spindle lift for your Ford Ranger, we believe that ours is the best option available. Our spindle lift is designed specifically for the Ranger, so you can be sure it will fit perfectly and work perfectly. Additionally, our spindle lift is made from high-quality materials that are built to last, so you can be confident that it will withstand whatever you throw at it. Finally, our spindle lift comes with a satisfaction guarantee so that you can buy with confidence knowing that if you’re not happy, we’ll make it right.