Best Antler Mount Skull Cap
The first thing you need to do is remove any flesh that’s still attached to the antler. This can be done with a sharp knife or a wire brush. Next, soak the antler in a mild bleach solution for about 15 minutes. This will kill any bacteria and help to prevent any future decay.
Once the antler is clean, it’s time to start prepping it for mounting. The first step is to remove the “buttons” at the base of the antlers. These are soft, spongy tissue that helps support the antlers during growth. You can remove them with a sharp knife or by carefully breaking them off with your hands.
Next, you need to drill holes into the base of the antlers so that they can be bolted onto the skull cap. It’s important to drill these holes slightly smaller than the bolts you’ll be using so that they have a tight fit. Once all of the holes are drilled, you can bolt the antlers onto the skull cap using washers and nuts.
Finally, you need to attach your new mount to something sturdy so that it can be displayed proudly in your home or office. The best option is to use heavy-duty screws and wall anchors. But if you want something a bit more unique, you could also consider hanging it from the ceiling using strong fishing line or heavy-duty wire.
Why Antler Mount Skull Cap Is Necessary?
Do you have a big buck hanging on your wall that is missing its antlers? It can be quite a disappointing sight. But don’t worry, there are ways to mount antlers without the use of a skull cap.
One method is to simply screw the antlers into the wood of the wall. This will provide a very solid hold and will keep the antlers from falling off. Be sure to use long screws so that they go all the way through the thickness of the skullcap and into the wood behind it.
Another option is to use epoxy or another type of adhesive to attach the antlers to the wall. This method takes a little more time and effort, but it will result in a very strong bond between the antlers and the wall.
Either way you choose to mount your antlers, make sure that they are securely attached so that they don’t fall off and hurt someone.
Our Top Picks For Best Antler Mount Skull Cap
Best Antler Mount Skull Cap Guidance
Skull Hooker bone brackets are the perfect way to display your smaller skull-plated trophies, such as deer and antelope. The brackets rotate 180 degrees with four tilt settings, so you can get the perfect angle for your display. The included Skull Hooker skull cap gives your display a professional and elegant look without the cost. The mounting is quick and easy, so you can have your trophy up in minutes. The high-grade steel is powder-coated for durability and is available in black or brown.
Common Questions on Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging and Mounting Capped Skulls for Display, Graphite Black, One Size (SKH-BB-SC-Assy)
• What is the Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging and Mounting Capped Skulls for Display, Graphite Black, One Size (SKH-BB-SC-Assy)?The Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging and Mounting Capped Skulls for Display, Graphite Black, One Size (SKH-BB-SC-Assy) is a bracket that is used to mount and display skulls.
• How is the Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging and Mounting Capped Skulls for Display, Graphite Black, One Size (SKH-BB-SC-Assy) mounted?
The Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging and Mounting Capped Skulls for Display, Graphite Black, One Size (SKH-BB-SC-Assy) is mounted by attaching it to the skull with screws.
• What is the purpose of the Skull Hooker Bone Bracket European Trophy Mount with Skull Cap Included – Perfect Kit for Hanging
Why We Like This
• Perfect for displaying smaller skull plated trophies, such as deer and antelope• Can rotate 180° and has 4 tilt settings for the perfect presentation of your skull• Comes with a Skull Hooker Skull Cap for a professional and elegant display• Can be mounted in minutes with quick and easy assembly• Made from durable, powder coated high grade steel
Additional Product Information
| Color | Graphite Black |
| Height | 11 Inches |
| Length | 11 Inches |
| Weight | 11 ounces |
Looking for a way to display your trophy deer antlers? Check out the Bone Collector The Change Up Antler Mounting Kit with Skull Cap! This mounting kit makes it easy to mount a match set of shed antlers or cut-off antlers, and allows you to change the width, angle, and location of the antlers based on your preference. The double ball joints allow for 360 degrees of ball rotation so you can display your antlers perfectly! The ANTLERS ARE REMOVABLE at any time, making it easy to change up your display as often as you like.
Common Questions on Bone Collector The Change Up Antler Mounting Kit with Skull Cap by Big 8 Products
• What are the dimensions of the Bone Collector The Change Up Antler Mounting Kit with Skull Cap by Big 8 Products?The dimensions of the Bone Collector The Change Up Antler Mounting Kit with Skull Cap by Big 8 Products are 12″ x 10″ x 6″.
• What is the weight of the Bone Collector The Change Up Antler Mounting Kit with Skull Cap by Big 8 Products?
The weight of the Bone Collector The Change Up Antler Mounting Kit with Skull Cap by Big 8 Products is 4.5 lbs.
• What is the Skull Cap material?
The Skull Cap is made of real maple wood.
• How many pieces are included in the kit?
The kit includes four pieces- the skull cap, two antler mounting brackets, and one set of screws.
Why We Like This
• The Change Up is a simple DIY antler mounting kit that makes it easy to mount a match set of shed antlers or cut off antlers.• The Change Up can be wall or table mounted and allows for custom positioning of the antlers.• The Change Up will hold any match set of a whitetail, mule deer, Blacktail, Coues, Fallow, Axis, Sika, etc.• The double ball joints on the Change Up allow for 360 degrees of ball rotation so you can display your antlers perfectly.• The ANTLERS ARE REMOVABLE at any time with the Change Up.
Expand the blog section into a detailed professional, witty and clever explanation on Allen Big Buck Trophy Mount Kit with Skull Cover and Engravable Plate.
Save money and mount your trophy yourself. Includes an engravable brass plate and mounting hardware. Recommended for deer, antelope, and similar-sized game. Black skull cover. Mossy Oak Break-Up Country plaque.
Looking to save a few bucks on your next trophy mount? Or maybe you’re just the DIY type. Either way, the Allen Big Buck Trophy Mount Kit is perfect for you. This kit includes everything you need to mount your own deer, antelope, or similar sized game, including an engravable brass plate and mounting hardware. Plus, the included black skull cover and Mossy Oak Break-Up Country plaque add a touch of class (and camo) to your trophy room. So why wait? Get the Allen Big Buck Trophy Mount Kit today and start saving!
Common Questions on Allen Big Buck Trophy Mount Kit with Skull Cover and Engravable Plate
• What do you need to mount a deer head?You will need the Allen Big Buck Trophy Mount Kit with Skull Cover and Engravable Plate.
• How do you mount a deer head?
First, boil the skull inclean water for 20 minutes to loosen the flesh. Next, remove the inner ear bones and brain tissue. Then scrape off any remaining flesh and thoroughly clean the skull. Once the skull is clean, place it in the mounting form and tighten the straps. Finally, apply the epoxy to the form and attach the antlers. Allow the epoxy to dry for 24 hours before hanging the mount.
• What are the dimensions of the mount?
The mount is 12″ wide x 10.5″ tall x 7″ deep.
• How much does the mount weigh?
The mount weighs 4 pounds.
• How long does it take to mount a deer head?
It takes approximately 1-2 hours to mount a deer head.
Why We Like This
You can save money by mounting your trophy yourself with this kit
The kit includes an engravable brass plate and mounting hardware
The skull cover is black and the plaque is in Mossy Oak Break Up Country
This mount is recommended for deer, antelope, and similar sized game
The engravable brass plate is a nice touch that allows you to personalize your mount
Additional Product Information
| Color | Mossy Oak Break-Up Country |
| Height | 2.5 Inches |
| Length | 12 Inches |
| Weight | 3 Pounds |
Mountain Mike’s Black Forest Antler Mounting Kit allows you to create your own traditional half-skull plaque mount right in your own home. The kit includes two different skull plates to get the best fit for your particular antlers, along with a rich green plack for a modern take on the classic Black Forest tradition. Compatible with both shed and harvested antlers from a variety of deer, Mountain Mike’s mounting kits give the look of a professional mount with an easy-to-use design that’s great for beginners.
Common Questions on Mountain Mike’s – Black Forest Antler Mounting Kit – Traditional Half-Skull Plaque Mounting Kit for Antlers – Fits Most Antlers – Compatible With Harvested and Shed Antlers
• What is the weight limit for this mount?The weight limit for this mount is 150 pounds.
• What is the size of this mount?
This mount is 12 inches long, 6 inches wide, and 2 inches deep.
•• What is the weight limit for this mount?
The weight limit for this mount is 150 pounds.
• What is the size of this mount?
This mount is 12 inches long, 6 inches wide, and 2 inches deep.
• How long will it take for the antlers to dry?
It will take approximately two weeks for the antlers to completely dry.
Why We Like This
• 1. Traditional Black Forest mounting kit for antlers• 2. Modern half skull plaque mounting kit• 3. Fits most antlers• 4. Compatible with shed and harvested antlers• 5. Easy to use kit for beginners
Additional Product Information
| Color | Green/Brown |
| Height | 4.9999999949 Inches |
| Length | 18.99999998062 Inches |
| Weight | 0.1 Pounds |
If you’re a hunter, then you know that feeling of elation when you finally get your hands on a trophy-worthy set of antlers. But what do you do with them once you’ve got them? Mounting them on your wall is a great way to show them off, and the Hunter’s Specialties Antler Skull Cap Mount is the perfect way to do it.
This mount is designed to showcase the antlers in all their glory, while also providing a sturdy and reliable way to display them. The antlers are securely mounted onto a skull cap, which is then mounted onto the wall. The skull cap provides a natural look and feel, while also ensuring that the antlers are displayed at their best.
The Hunter’s Specialties Antler Skull Cap Mount is the perfect way to show off your trophy antlers, and is sure to impress anyone who sees them. Order yours today and start showing off your hunting skills!
Common Questions on Hunter’s Specialties Antler Skull Cap Mount
• What is the Hunter’s Specialties Antler Skull Cap Mount?The Hunter’s Specialties Antler Skull Cap Mount is a European-style mount for displaying the skull cap of a deer or other large game animal. It is made of cast aluminum and has a powder-coated finish.
• How do you mount the Hunter’s Specialties Antler Skull Cap Mount?
The Hunter’s Specialties Antler Skull Cap Mount is mounted by screwing it into the wall or other surface. It comes with screws and wall plugs for this purpose.
• What is the weight capacity of the Hunter’s Specialties Antler Skull Cap Mount?
The Hunter’s Specialties Antler Skull Cap Mount can hold up to 10 pounds.
• What is the warranty on the Hunter’s Specialties Antler Skull Cap Mount?
The Hunter’s Specialties Antler Skull Cap Mount has a one-year warranty.
Why We Like This
• A great way to display your trophy• Realistic look• Hand painted for extra realism• Lightweight and easy to hang• Comes with everything you need for installation
Additional Product Information
| Color | Multi |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.25 Pounds |
Benefits of Antler Mount Skull Cap
As most people are aware, deer antlers are one of the fastest growing organs in the animal kingdom. They can grow up to an inch a day during the peak of their growth cycle! This makes them a perfect candidate for use as an all-natural supplement, which is why they are gaining popularity as a “superfood”.
Deer antler velvet is rich in compounds that can help promote tissue growth and regeneration, making it ideal for healing wounds or injuries. It also contains high levels of essential minerals such as calcium and phosphorus, which are necessary for strong bones and teeth. In addition, deer antler velvet contains compounds that boost energy levels and stamina, making it perfect for athletes or anyone looking to improve their physical performance.
Buying Guide for Best Antler Mount Skull Cap
When considering the best antler mount skull cap, it is important to consider the following factors: 1. The type of animal the cape came from. 2. The size and shape of the cape. 3. The overall quality of the cape. 4. The price of the cape.
Frequently Asked Question
What is the best place to purchase an antler mount skull cap?
There is no definitive answer to this question as it depends on personal preferences. Some people may prefer to purchase an antler mount skull cap from a local store, while others may prefer to buy one online. Ultimately, the best place to purchase an antler mount skull cap is whichever option is most convenient and affordable for the buyer.
How do you clean and prepare the antlers for mounting?
The first step is to remove any meat, sinew, and hair from the antlers. This can be done with a sharp knife or a rotary tool with a sanding attachment. Next, the antlers need to be cleaned of any dirt or debris. This can be done with a stiff brush and some soapy water. Once the antlers are clean and dry, they can be sanded to smooth out any rough edges. Finally, the antlers can be sealed with a clear sealant to protect them from moisture and UV damage.
What size skull cap should be used for mounting purposes?
There is no definitive answer to this question as it will depend on the specific skull being mounted. It is recommended that you consult with a professional taxidermist to ensure that the skull cap is the correct size for the skull you are hoping to mount.
How do you attach the antlers to the skull cap?
You drill a hole into the skull cap and screw in a metal bolt. Then you attach the antlers to the bolt.
What type of sealant or adhesive should be used to secure the antlers to the skull cap?
A sealant or adhesive that can withstand high temperatures should be used to secure the antlers to the skull cap. A silicone-based adhesive would be a good option.
Conclusion
Thank you for your time, it has been a pleasure to introduce this unique product to you. I strongly believe that this is the best antler mount skull cap on the market and I hope you will give it a try. This product is sure to provide years of enjoyment and make a great addition to any collection.