Best Drain Plug Crush Washer
Why Drain Plug Crush Washer Is Necessary?
A drain plug crush washer is a small, flat disk made of metal or rubber that is used to seal the connection between the drain plug and the oil pan. The washer helps to prevent leaks by creating a tight seal between the two surfaces.
Our Top Picks For Best Drain Plug Crush Washer
Best Drain Plug Crush Washer Guidance
The 20pcs oil drain plug gasket washer set is made of high grade aluminum alloy and strictly adheres to quality guidelines to offer you the best possible batch. The crush washer is compatible with most Honda/Acura models 1973-2022, including but not limited to ACCORD, CR-V, CR-Z, CIVIC, CLARITY, CROSSTOUR, ELEMENT, FIT, HR-V, INSIGHT, ODYSSEY, PASSPORT, PILOT, RIDGELINE, S2000, ILX, MDX, NSX, RDX, RLX, TLX, and ZDX. The oil drain plug washers have the following dimensions: ID is 056in = 14mm ; OD is 085in = 215mm ; thickness is 0075in = 19mm. These washers fit snug and flush, providing a much more tight and secure fit than plastic or rubber seals. They also boast much longer lasting sealing capabilities.
Common Questions on 20pcs Oil Drain Plug Gasket Washer Crush Seal – 14mm Replacement for Honda/Acura – OEM 94109-14000 Fits Most Popular Models 1973-2022 by AUTOMAJOR
• What is the best oil drain plug gasket washer for Honda/Acura?The best oil drain plug gasket washer for Honda/Acura is the OEM 94109-14000.
• What size is the OEM 94109-14000 oil drain plug gasket washer?
The OEM 94109-14000 oil drain plug gasket washer is 14mm.
• What is the replacement process for the OEM 94109-14000 oil drain plug gasket washer?
The replacement process is simple. Just remove the old gasket and install the new one.
• What models of Honda and Acura does the OEM 94109-14000 oil drain plug gasket washer fit?
The OEM 94109-14000 oil drain plug gasket washer fits most popular models from 1973 to 2022.
• Where can I buy the OEM 94109-14000 oil drain plug gasket washer?
You can purchase the OEM 94109-14000 oil drain plug gasket washer from Automajor.
Why We Like This
• Made of high grade aluminum alloy for durability• Compatible with most Honda/Acura models• Part numbers: 94109 14000 9410914000 16956 243600 095144 ODP65292 65282 22007400 V530068• Dimensions: ID is 056in = 14mm ; OD is 085in = 215mm ; thickness is 0075in = 19mm• Secure fit with a snug and flush seal
Mission Automotive’s oil crush washers/drain plug gaskets are the perfect replacements for your Honda OEM washers/gaskets. Our washers are designed and constructed to strict quality standards and made from high quality materials, ensuring proper fit with the drain plug and creating a tight seal.
These washers are compatible with most Honda models, including Accord, Accord Crosstour, Accord Hybrid, Civic, Civic GX, Civic Hybrid, Civic Si, Crosstour, CR-V (only pre-2011 Does not fit 2011+), CR-X, CR-Z, CR-Z Hybrid, Del Sol, Element, FCX Clarity, Fit, Fit Hybrid, HR-V, Insight, Insight Hybrid, Odyssey, Passport, Pilot, Prelude, Ridgeline, S2000 and many motorcycle models.
Our value pack of 20 is an excellent value whether you’re a professional mechanic or simply someone who likes to do it yourself!
Common Questions on 20-Pack of Oil Crush Washers/Drain Plug Gaskets Compatible with Honda – Compatible with OEM 94109-14000 – Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More – by Mission Automotive
• What is the 20-Pack of Oil Crush Washers/Drain Plug Gaskets Compatible with Honda – Compatible with OEM 94109-14000 – Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More – by Mission Automotive?The 20-Pack of Oil Crush Washers/Drain Plug Gaskets Compatible with Honda – Compatible with OEM 94109-14000 – Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More – by Mission Automotive is a pack of 20 oil crush washers/drain plug gaskets that are compatible with Honda.
• What are the dimensions of the 20-Pack of Oil Crush Washers/Drain Plug Gaskets Compatible with Honda – Compatible with OEM 94109-14000 – Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More – by Mission Automotive?
The dimensions of the 20-Pack of Oil Crush Washers/Drain Plug Gaskets Compatible with Honda – Compatible with OEM 94109-14000 – Fits Civic, Accord, CR-V/CRV, Pilot, Odyssey and More –
Why We Like This
• Perfect Replacement For Your Honda OEM Washer / Gasket• Strict Quality Standards• Wide Compatibility• Value Pack Of 20• Mission Automotive Parts
Additional Product Information
| Height | 0.1 Inches |
| Length | 2 Inches |
M14 Oil Drain Plug Gaskets Crush Washers Seals Rings Fit for Honda Yamaha Triumph Kawasaki Suzuki, Used for Oil Change, 10 Pack. OD(outside diameter): 22 mm / 086 inch, ID(inside diameter): 14 mm / 055 inch , Thickness: 2 mm / 008 inch.
This oil drain plug gaskets crush washers fit for Honda Yamaha Triumph Kawasaki Suzuki or any metric application that requires a 14mm bolt. This 14 mm / 055 inch oil drain plug gaskets crush washers is needed for every oil change. Package including 10pcs crush washers.
Common Questions on M14 Oil Drain Plug Gaskets Crush Washers Seals Rings Fit for Honda Yamaha Triumph Kawasaki Suzuki, Used for Oil Change, 10 Pack
• What is the M14 Oil Drain Plug Gasket?The M14 Oil Drain Plug Gasket is a crush washer that is used to seal the oil drain plug on many motorcycles.
• What is the purpose of the M14 Oil Drain Plug Gasket?
The M14 Oil Drain Plug Gasket helps to prevent oil leaks by sealing the oil drain plug on the motorcycle.
• How do I install the M14 Oil Drain Plug Gasket?
The M14 Oil Drain Plug Gasket can be installed by hand or with a socket wrench.
• What is the advantage of the M14 Oil Drain Plug Gasket over other brands?
The M14 Oil Drain Plug Gasket is constructed of high-quality materials for durability and reliability.
Why We Like This
• Fits Honda, Yamaha, Triumph, Kawasaki, Suzuki, and other metric applications that require a 14mm bolt• OD: 22 mm / 086 inch• ID: 14 mm / 055 inch• Thickness: 2 mm / 008 inch• Package includes 10 crush washers
If you’re looking for a quality replacement for your Honda OEM oil drain plug washer or gasket, these 50 Pieces Aluminum Engine Oil Crush Washers are a great option.
Made of good quality materials and constructed to strict quality standards, these washers are guaranteed to properly fit your drain plug. With an outer diameter of 22 mm/ 0.86 inch and inner diameter of 14 mm/ 0.55 inch, they’re a great replacement for your old, worn out washers.
Package contents: 50 pieces
Size:Outside diameter: 22 mm/ 0.86 inch
Inner diameter: 14 mm/ 0.55 inch
Thickness: 2 mm/ 0.08 inch
Common Questions on 50 Pieces Aluminum Engine Oil Crush Washers Drain Plug Gaskets Compatible with Part 94109-14000 Fits Civic, Accord, CR-V/CRV, and More
• What is the best way to remove a oil crush washer?The best way to remove a oil crush washer is with a pair of pliers.
• Why do you need to replace your oil crush washers?
Oil crush washers are designed to seal the oil drain plug and prevent oil leaks. Over time, they can become worn or damaged and need to be replaced.
• What is the best way to install a new oil crush washer?
The best way to install a new oil crush washer is to lubricate it with a little bit of oil before installing it. This will help it seal better and prevent leaks.
• What are some common symptoms of a bad oil crush washer?
Some common symptoms of a bad oil crush washer are oil leaks, a rattling noise from the engine, or low oil pressure.
Why We Like This
• 1. 50 pieces of good quality aluminum oil drain plug washers• 2. Compatible replacement for your Honda OEM washer or gasket• 3. Made of good quality materials• 4. Outside diameter: 22 mm/ 086 inch• 5. Inner diameter: 14 mm/ 055 inch
Additional Product Information
| Height | 0.5905511805 Inches |
| Length | 3.93700787 Inches |
The M12 Copper Oil Drain Plug Crush Washer Gasket Fits for BMW is a great product that provides a soft crush interface between mating surfaces to ensure an excellent seal and no leaks. This oil drain plug crush washer is standard size fits most BMWs and provides crush washers that are durable and have a long lasting seal.
Common Questions on M12 Copper Oil Drain Plug Crush Washer Gasket Fits for BMW, M12 x 17 x 1.5, 10 Pack
• What is the BMW M12 Copper Oil Drain Plug Crush Washer Gasket?The BMW M12 Copper Oil Drain Plug Crush Washer Gasket is a washer that is placed between the oil drain plug and the oil pan. It helps to create a seal so that oil does not leak out.
• What is the size of the BMW M12 Copper Oil Drain Plug Crush Washer Gasket?
The BMW M12 Copper Oil Drain Plug Crush Washer Gasket is M12 x 17 x 1.5.
• How many BMW M12 Copper Oil Drain Plug Crush Washer Gaskets are in a pack?
There are 10 BMW M12 Copper Oil Drain Plug Crush Washer Gaskets in a pack.
• How do you install the BMW M12 Copper Oil Drain Plug Crush Washer Gasket?
The BMW M12 Copper Oil Drain Plug Crush Washer Gasket is installed by placing it between the oil drain plug and the oil pan. Then, the oil drain plug is tightened to create a seal.
Why We Like This
• Fits most BMWs• Standard size• Instructions included• 10 Pack• Prevents leaks
Benefits of Drain Plug Crush Washer
Crush washers are a type of mechanical seal. They are made of slightly harder metal than the mating surface and have a raised crest or “rib” on one side. When the nut is tightened, the crush washer is forced into a gap between the threads and compressed. The raised crest creates an interference fit that helps to prevent leaks by providing pressure against both faces being sealed.
Buying Guide for Best Drain Plug Crush Washer
If you are in the market for a drain plug crush washer, there are a few things you should keep in mind to ensure you purchase the best one for your needs. First, consider the material the washer is made from. Some materials are better at sealing than others, so be sure to choose one that will create a tight seal. Second, pay attention to the size of the washer. It should be slightly larger than theopening in your drain plug so that it can create a good seal. Finally, make sure the washer is compatible with your vehicle’s drain plug threading. With these factors in mind, you will be sure to find the best drain plug crush washer for your needs.
Frequently Asked Question
What is the best drain plug crush washer for your car?
There is no definitive answer to this question as the best drain plug crush washer for your car will depend on a number of factors, including the make and model of your car, your driving habits, and the conditions of your local roads. That said, some drain plug crush washers are better than others, and it is generally advisable to choose a washer made from high-quality materials such as stainless steel or copper.
What are the benefits of using a drain plug crush washer?
The drain plug crush washer is a type of washer that is used to seal the drain plug on a vehicle’s oil pan. The crush washer is made of a soft metal that is designed to deform when the drain plug is tightened, creating a seal.
How often should you replace your drain plug crush washer?
This will depend on how often you use your vehicle and what kind of conditions you typically drive in. Generally, it is recommended that you replace your drain plug crush washer every 20,000 miles or so.
What are the signs that your drain plug crush washer needs to be replaced?
If your vehicle is leaking oil, the drain plug crush washer needs to be replaced.
How do you properly install a drain plug crush washer?
If your car has a drain plug with a crush washer, be sure to replace the washer each time you remove the plug. To install, simply place the new crush washer onto the plug and screw it back in.
Conclusion
Thank you for your time. I hope I have convinced you to buy our best drain plug crush washer. This product is sure to help save you time and money in the long run.