Best Trailer Axle Spindle And Hub Kit
Why Trailer Axle Spindle And Hub Kit Is Necessary?
Because having a good trailer axle spindle and hub kit is important for towing safety. It helps to keep the axle aligned properly with the tongue of the trailer, allows for smooth turning, and helps to distribute the weight of the trailer evenly. A good quality kit will also last longer and provide a smoother ride.
Our Top Picks For Best Trailer Axle Spindle And Hub Kit
Best Trailer Axle Spindle And Hub Kit Guidance
If you’re looking for a replacement axle kit for your 2,000 lb trailer, this Pack of 2 Trailer Axle Kits from The ROP Shop is a great option. These kits come with 4 on 4″ bolt idler hubs and 1″ round BT8 spindles, and are rated to 1,250 lbs each or 2,000 lbs for the pair. They’re a great fit for 2,000 lb trailers with straight spindles, and come with everything you need for a simple installation. So if your current axle kit is wearing out, or you just need a reliable replacement, be sure to check out these Trailer Axle Kits from The ROP Shop.
Common Questions on The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle
• What is the width of the trailer axle?The trailer axle is 2 inches wide.
• What is the diameter of the spindle?
The spindle is 1 inch in diameter.
• What is the bolt pattern of the hubs?
The hubs have a 4 on 4″ bolt pattern.
Why We Like This
• Pack of two replacement trailer axle kits• 1,250 lb hub capacity• Used on 2,000 lb axle• Comes with idler hub, lug nuts, spindle, castle nut, pin, washer, inner and outer bearings, grease seal, and dust cap• 4 on 4″ bolt idler hub• 1″ round BT8 spindle
If you’re looking for a quality replacement axle kit for your 2,000 lb trailer axle, look no further than The ROP Shop’s pack of 4 trailer axle kits. These kits come with 4 on 4″ bolt idler hubs and 1″ round BT8 spindles, rated to 1,250 lbs each or 2,000 lbs for the pair. Everything you need is included in the kit, so you can get your trailer back up and rolling in no time.
Common Questions on The ROP Shop (Pack of 4) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle
• What is the ROP Shop?The ROP Shop is an online retailer specializing in outdoor power equipment and parts.
• What are the dimensions of the ROP Shop’s trailer axle kits?
The ROP Shop’s trailer axle kits come in a variety of sizes to fit your specific needs.
• How much does the ROP Shop’s trailer axle kit weigh?
The ROP Shop’s trailer axle kit weighs approximately 12 pounds.
• What is the warranty on the ROP Shop’s trailer axle kit?
The ROP Shop offers a limited one-year warranty on its trailer axle kit.
Why We Like This
• 4 on 4″ bolt idler hub• 1″ round BT8 spindle• 1,250 lb hub capacity• 2″ grease/dust cap• 8″ shaft length
If you’ve got a 2,000 lb trailer axle with a 1-1/16″ straight spindle, then these new trailer idler hub kits from JDMSPEED are just what you need. Each kit contains 4x L44649 outer cone bearings, 2x grease seals, 2x E-Z lube grease caps with rubber plug, and 10x cone wheel nuts with 1/2″-20 threading. Plus, the hub is already set up for a 5 on 4.5″ bolt pattern and has the necessary bearing races and 1/2″-20 studs installed. So if you’re looking for an easy lube replacement for most 2,000 lb hubs, then this is the choice for you.
Common Questions on JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5″ Replacement for Axle 1-1/16″ Bearings 2000 lbs – 22016K
• What is the JDMSPEED 2 Trailer Idler Hub Kit 5 on 4.5″ Replacement for Axle 1-1/16″ Bearings 2000 lbs – 22016K?The JDMSPEED 2 Trailer Idler Hub Kit 5 on 4.5″ Replacement for Axle 1-1/16″ Bearings 2000 lbs – 22016K is a replacement for your axle’s 1-1/16″ bearing. This kit includes five idler hubs, so you can replace all of the bearings on your axle at once. Each hub has a 2000 lb capacity, making this a great option for heavier trailers. This kit is easy to install, and makes a great replacement for worn or damaged bearings.
Why We Like This
• Set of 2 New trailer idler hub kits 5 on 45 for 2,000 lbs trailer axle, for 1 1/16″ straight spindle• Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1 1/16″, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2″ 20 thread• Bolt pattern: 5 on 45″, bearing races and 1/2″ 20 studs installed• Note: This hub fit straight spindles, not for tapered spindles• Easy Lube; Replacement For Most 2,000 lb Hubs
M-Parts offers a 3,500-lb Trailer Hub Kit that is a 5 Bolt 5″ x 4.5″ Replacement Trailer Hub Kit for 3,5000-lb Trailer axles. This Trailer Hub Kit includes a Trailer Hub 5 on 4.5 Trailer Hub, 2 Bearings, a Grease Seal, a Dust Cap, Lug Nuts, and a Cotter Pin.
Common Questions on M-Parts 3,500-lb Trailer Hub Kit, 5 Bolt 5″ x 4.5″ Replacement Trailer Hub Kit for 3,5000-lb Trailer axles, Trailer Hub 5 on 4.5 Trailer Hub (88-545KIT-1)
• What is the weight capacity of this trailer hub kit?The weight capacity of this trailer hub kit is 3,500-lbs.
• What is the bolt pattern for this trailer hub kit?
The bolt pattern for this trailer hub kit is 5 on 4.5.
• What size axles does this trailer hub kit fit?
This trailer hub kit fits 3,500-lb trailer axles.
Why We Like This
• For 3,500 lb trailer axles• 5 on 4.5 bolt pattern• Includes L 68149 inner bearing, L 44649 outer bearing, grease seal, EZ Lube dust cap, lug nuts, and cotter pin• M Parts Auto specializes in high quality trailer parts and accessories• Part number: 88 545KIT1
Are you in need of new trailer idler hub kits? If so, you’ll be glad to know that we have just what you’re looking for! Our set of 2 new trailer idler hub kits are perfect for 3,500 lbs trailer axles. They come complete with bolt pattern: 5 on 45″, bearing races and 1/2″-20 studs installed. Plus, each kit also includes: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1719″ x 2565″, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2″-20 thread.
Here at Libra Trailer Parts, we have been supplying US trailer manufacturers OEM parts 15 years. So you can rest assured that you’re getting high quality products that will last. Order your set today and be back on the road in no time!
Common Questions on LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle – 22017K
• What is the LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle – 22017K?The LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 3500 lbs Axle – 22017K is a set of 2 trailer idler hub kits that are designed for use with a 3500 lbs axle. The kit includes everything needed to replace your existing hubs, including bearings, seals, and nuts.
Why We Like This
• 1. Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle• 2. Bolt pattern: 5 on 4.5″, bearing races and 1/2″ 20 studs installed• 3. Kits also include: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719″ x 2.565″, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2″ 20 thread• 4. Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 15 years• 5. Perfect for boat trailers, utility trailers, and campers
Additional Product Information
| Height | 14 Inches |
| Length | 7 Inches |
| Weight | 15 Pounds |
Benefits of Trailer Axle Spindle And Hub Kit
Whether you’re looking to replace a worn out axle or upgrade your current one, a best trailer axle spindle and hub kit is a great choice. Not only will you get an improved ride, but you’ll also get increased durability and performance. Here are just some of the benefits that come with upgrading to a best trailer axle spindle and hub kit:
Improved Ride Quality: One of the main benefits of upgrading to best trailer axle spindle and hubs is the improved ride quality. With better bearings and stronger construction, your trailer will roll more smoothly down the road. This is especially important if you frequently tow heavy loads as it will help prevent them from shifting around while in transit.
Increased Durability: Another big benefit of using bestquality axles is their increased durability. With thicker materials and higher quality construction, they can withstand more wear and tear than standard axles – meaning they’ll last longer before needing to be replaced again. If you frequently travel on rough roads or over uneven terrain, this added durability can be extremely helpful in preventing damage (and costly repairs!) down the line.
Buying Guide for Best Trailer Axle Spindle And Hub Kit
When looking for the best trailer axle spindle and hub kit, there are a few things to consider. The first is the size of the kit. Make sure to measure your trailer axle before purchasing a kit so you know what size to get. The second is the load capacity. Be sure to check how much weight your trailer can safely carry before selecting a kit. The third is the type of hub included in the kit. Some kits come with standard hubs, while others include locking hubs or disk brakes. Be sure to select the appropriate kit for your needs. Finally, make sure to read reviews before purchasing any trailer parts so you can be confident in your purchase.
Frequently Asked Question
What is the best trailer axle spindle and hub kit for your trailer?
There is no definitive answer to this question as it depends on a variety of factors, such as the type and size of your trailer, the type of terrain you’ll be traversing, and your personal preferences. That said, some popular trailer axle spindle and hub kits include the Dexter E-Z Lube Hub Kit and the Timbren SES Kit.
How to properly install a trailer axle spindle and hub kit?
Before you begin, make sure you have all the necessary tools and parts. 1. To start, remove the old hub and spindle. To do this, you will need to remove the axle nut, washer, and cotter pin. Next, remove the brake drum or rotor. Finally, remove the hub by pulling it off the spindle. 2. Now, take your new spindle and hub kit and attach the spindle to the hub. Make sure the spindle is properly aligned with the hub, then secure it in place with the axle nut. 3. Once the spindle is secure, you can now attach the brake drum or rotor. Make sure everything is properly aligned, then secure it in place with the wheel bolts. 4. Finally, re-install the cotter pin and washer to secure the axle nut.
What are the advantages and disadvantages of different kinds of trailer axle spindle and hub kits?
There is no definitive answer to this question as it depends on a variety of factors, including the specific trailer, the intended use of the trailer, and the personal preferences of the individual. Some factors that could be considered include the weight capacity of the trailer, the number of axles on the trailer, the type of brakes on the trailer, and the overall cost.
How can you extend the life of your trailer axle spindle and hub kit?
The life of your trailer axle spindle and hub kit can be extended by regularly inspecting and servicing the components.
How to troubleshoot and repair common trailer axle spindle and hub kit problems?
If you are having problems with your trailer axle spindle or hub kit, there are a few things you can do to troubleshoot and repair the problem. First, check to see if the spindle or hub is damaged. If there is damage, you will need to replace the spindle or hub. Next, check the bearings and make sure they are not damaged or worn. If the bearings are damaged, you will need to replace them. Finally, check the brakes and make sure they are functioning properly. If the brakes are not working properly, you will need to adjust or replace them.
Conclusion
The best trailer axle spindle and hub kit on the market is the one from Dexter. It’s a high-quality product that’s built to last, and it comes with a great warranty. I highly recommend it to anyone who needs a new trailer axle spindle and hub kit.