Best Water Pump Pulley Spacer For Your Car
Why Water Pump Pulley Spacer Is Necessary?
A water pump pulley spacer is a small device that sits between the water pump pulley and the engine. It is used to space out the water pump so that it lines up correctly with the engine’s crankshaft. Without a Pulley Spacer, The Water Pump would sit too close to The Harmonic Balancer and likely cause premature wear or damage to both components.
Our Top Picks For Best Water Pump Pulley Spacer
Best Water Pump Pulley Spacer Guidance
If your vehicle’s water pump pulley is not properly aligned, it can cause the belt to slip or become damaged. The Spectre Performance SPE-4480 Water Pump Pulley Shim Kit includes three shims of different thicknesses (1/16″, 1/8″, and 3/16″) to help you achieve the proper pulley alignment. Installation is easy and requires no special tools or skills.
Common Questions on Spectre Performance – SPE-4480 Water Pump Pulley Shim Kit
• What is the Spectre Performance – SPE-4480 Water Pump Pulley Shim Kit?The Spectre Performance – SPE-4480 Water Pump Pulley Shim Kit is a shim kit that is used to adjust the clearance between the water pump pulley and the crankshaft on your vehicle.
• Why would you need to use this shim kit?
If the clearance between the water pump pulley and the crankshaft is too large, it can cause the water pump to overheat and fail. Additionally, if the clearance is too small, it can cause the water pump to bind and not function properly.
• How do you install the shims?
The shims are installed between the water pump pulley and the crankshaft. You will need to remove the water pump pulley and the crankshaft bolts in order to install the shims.
• What is the largest shim that can be used with this kit?
The largest shim that can be used with this kit is .020″.
• What is the smallest shim that can be used with this kit?
The
Why We Like This
• 1. Aluminum construction ensures durability.• 2. Kit includes 3 1/16 inch shims for thickness totals of 1/16 inch, 1/8 inch and 3/16 inch.• 3. Easy to install with no special tools or skills required.• 4. Use between the water pump flange and the pulley to space the pulley outwards for proper belt alignment.• 5. Helps to improve water pump efficiency.
Additional Product Information
| Height | 0.5 Inches |
| Length | 5.7 Inches |
| Weight | 0.15999986935217 Pounds |
If your ride is anything like ours, then you know that the water pump is one of the most important parts of the cooling system. Without it, your engine would overheat and seize up in no time flat. So, when it’s time to replace your water pump, you want to make sure that you’re using the best possible parts. That’s where the Moroso 64035 Shim Kit comes in.
This kit provides proper drive belt alignment with your water pump, thanks to the shims that are installed between the water pump pulley and drive flange. Plus, it’s made from aluminum for durability and long lasting performance. Best of all, it’s designed to be a universal fit, so you shouldn’t have any trouble installing it on your car.
So, if you’re looking for a top quality water pump shim kit, then you want the Moroso 64035. It’s the best way to keep your cooling system running like new.
Common Questions on Moroso 64035 Shim Kit for Water Pump Pulleys
• What is the model number of the Moroso water pump pulley shim kit?The model number of the Moroso water pump pulley shim kit is 64035.
• What is the function of a water pump pulley shim kit?
A water pump pulley shim kit is used to adjust the alignment of the water pump pulley with the crankshaft pulley. By shimming the water pump pulley, you can ensure that the belts are aligned correctly and prevent them from coming off.
• Why would I need to shim my water pump pulley?
If your water pump pulley is not aligned correctly with the crankshaft pulley, it can cause the belts to come off. Shimming the water pump pulley will ensure that the belts are aligned correctly.
• How do I install a water pump pulley shim kit?
Installation instructions can be found in the included manual.
Why We Like This
1. Moroso 64035 Shim Kit for Water Pump Pulleys is made of aluminum for durability.
2. The kit provides proper drive belt alignment with water pump.
3. Shims are installed between the water pump pulley and drive flange.
4. This product is a universal fit.
5. The shim kit is easy to install.
If your water pump pulley is causing your belt to slip, then you may need a shim kit. The Allstar water pump pulley shim kit allows you to easily and quickly adjust the clearance on your water pump pulley, so that your belt can get a tight grip and stop slipping. This kit comes with 3 different size shims, so that you can find the perfect fit for your pulley. Installation is quick and easy, so you can be back on the road in no time.
Common Questions on Allstar Water Pump Pulley Shim Kit
• What is the application of Allstar Water Pump Pulley Shim Kit?Allstar Water Pump Pulley Shim Kit is used to shim the water pump pulley on all models of Chrysler except PT Cruiser.
• Where is Allstar Water Pump Pulley Shim Kit manufactured?
Allstar Water Pump Pulley Shim Kit is manufactured in the United States of America.
• What is the weight of Allstar Water Pump Pulley Shim Kit?
Allstar Water Pump Pulley Shim Kit weighs 0.6 ounces.
• What are the dimensions of Allstar Water Pump Pulley Shim Kit?
Allstar Water Pump Pulley Shim Kit’s dimensions are 1 x 4 x 3 inches.
• What is the material composition of Allstar Water Pump Pulley Shim Kit?
Allstar Water Pump Pulley Shim Kit is made of high-quality steel for durability.
Why We Like This
• 1. Allstar Water Pump Pulley Shim Kit is designed to fit a variety of vehicles.• 2. The kit includes shims of different thickness to ensure a proper fit.• 3. The shims are made of durable materials for long lasting use.• 4. The kit is easy to install and comes with instructions for a successful installation.• 5. Allstar Water Pump Pulley Shim Kit is backed by a satisfaction guarantee.
Additional Product Information
| Height | 6 Inches |
| Length | 108 Inches |
| Weight | 0.1763698096 Pounds |
A water pump pulley shim is a vital part of many Chevy and Ford water pumps. The shim sits between the water pump and the pulley, and helps to provide a tight, secure fit. This particular water pump pulley shim kit contains three separate shims, each of which is designed to fit a 5/8″ or 3/4″ center shaft on the water pump.
Water pump pulley shims are easy to install, and are extremely durable and long lasting. They are also vehicle specific, so it is important to make sure that you select the correct shim kit for your particular make and model of vehicle.
Common Questions on Mr. Gasket Water Pump Pulley Shim Kit-3Pc
• What is the part number for Mr. Gasket Water Pump Pulley Shim Kit-3Pc?5810
• What is the UPC for Mr. Gasket Water Pump Pulley Shim Kit-3Pc?
080664058109
• How many pieces are in Mr. Gasket Water Pump Pulley Shim Kit-3Pc?
3
• What is the weight of Mr. Gasket Water Pump Pulley Shim Kit-3Pc?
0.05 lb
Why We Like This
• 1. Fits most Chevy and Ford water pumps• 2. Fits 5/8″ & 3/4″ center shaft on water pump• 3. Installs between water pump & pulley• 4. Easy installation• 5. Durable and long lasting
Additional Product Information
| Weight | 0.1 Pounds |
The KIPA Aluminium Single groove Water Pump Pulley is a top-grade pulley that is expertly made in compliance with stringent industry standards. It is manufactured from industry-leading materials using up-to-date equipment and it ensures everlasting reliability and enduring value. The pulley has a diameter of 6 9/16″ and is 2 1/4″ tall. The bolt pattern is 2 1/8″ and the center hole is 5/8″. The pulley is machined from billet aluminium and features deep grooves to prevent belt from slipping. This is a single groove pulley designed for your small block Chevy 283 – 350 with a long water pump. It connects to various engine accessory drive components by a belt drive system and helps ensure that components receive power from the rotating crankshaft to perform their vital functions. This product is distinguished by total quality assurance. It is made from high-strength materials using advanced manufacturing techniques to provide outstanding performance and reliability. The pulley is durable and highly resistant to wear. It is a great addition to your project.
Common Questions on KIPA Aluminium Single groove Water Pump Pulley For SB SBC Small Block Chevy 265 283 305 327 350 383 400 with a long water pump Satin Aluminium Finish Durable 1-Groove #9842
• What is the weight of the KIPA Aluminium Single groove Water Pump Pulley?The weight of the KIPA Aluminium Single groove Water Pump Pulley is 9.842 ounces.
• What is the width of the KIPA Aluminium Single groove Water Pump Pulley?
The width of the KIPA Aluminium Single groove Water Pump Pulley is 3.5 inches.
• What is the length of the KIPA Aluminium Single groove Water Pump Pulley?
The length of the KIPA Aluminium Single groove Water Pump Pulley is 5.5 inches.
• What is the height of the KIPA Aluminium Single groove Water Pump Pulley?
The height of the KIPA Aluminium Single groove Water Pump Pulley is 2.75 inches.
• What is the diameter of the KIPA Aluminium Single groove Water Pump Pulley?
The diameter of the KIPA Aluminium Single groove Water Pump Pulley is 6.25 inches.
Why We Like This
• 1. Top grade water pump pulley• 2. Fusion of well balanced design and high level of craftsmanship• 3. Manufactured from industry leading materials• 4. Deep grooves to prevent belt from slipping• 5. Durable and highly resistant to wear
Benefits of Water Pump Pulley Spacer
If your car’s engine is overheating, one potential cause could be a faulty water pump pulley. The water pump pulley is responsible for connecting the water pump to the engine and ensuring that coolant is circulated properly. If the pulley isn’t functioning correctly, it can lead to engine overheating.
Fortunately, there are aftermarket water pump pulleys available that can improve cooling performance and help prevent engine overheating. Water pump spacers are one type of aftermarket Pulley available, and they offer several benefits:
Better Cooling Performance: By increasing the distance between the water pump impeller and the back of the timing cover, spacers can allow for better coolant circulation and improved cooling performance. This is especially beneficial if your car races or frequently tows heavy loads.
Buying Guide for Best Water Pump Pulley Spacer
A water pump pulley spacer is an important component in the cooling system of your car. It helps to keep the water pump pulley from wobbling and leaking, and it also provides a smooth surface for the belt to ride on. If you are looking for a quality water pump pulley spacer, there are a few things you should keep in mind.
First, make sure that the water pump pulley spacer you choose is made from durable materials. It should be able to withstand high temperatures and pressures without breaking down. Second, choose a water pump pulley spacer that fits your car’s make and model. Many spacers are universal, but some are specific to certain cars. Make sure you get the right one!
Third, consider the thickness of the water pump pulley spacer. A thicker spacer will provide more stability and prevent leaks better than a thinner one. Finally, think about how easy it is to install the water pump pulley spacer. Some spacers are easier to install than others, so choose one that won’t give you too much trouble.
following these tips will help you find the best water pump puller space for your car!
Frequently Asked Question
What is the best water pump pulley spacer for your car?
There is no definitive answer to this question as it depends on the make and model of your car as well as your personal preferences. Some people prefer to use a water pump pulley spacer that is made from aluminum, while others prefer to use a spacer made from steel. Ultimately, it is up to you to decide which material you prefer and what will work best for your car.
What are the benefits of using a water pump pulley spacer?
Some benefits of using a water pump pulley spacer are that it can help to increase water pressure, improve pump efficiency, and reduce noise. It can also help to extend the life of the pump by reducing wear and tear.
How do you install a water pump pulley spacer?
In general, the installation process for a water pump pulley spacer will involve removing the old pulley, cleaning the surface of the water pump, aligning the new pulley spacer with the water pump, and then bolting the spacer in place.
What are the step-by-step instructions for installing a water pump pulley spacer?
1. Disconnect the negative battery cable. 2. Remove the drive belt. 3. Remove the water pump pulley. 4. Install the water pump pulley spacer. 5. Reinstall the water pump pulley. 6. Reconnect the negative battery cable.
How do you know if your water pump pulley spacer is installed correctly?
If your water pump pulley spacer is installed correctly, you should be able to see a small gap between the edge of the spacer and the water pump pulley.
Conclusion
Thank you for your time. After reviewing our product and company, we hope that you will find us to be the best possible supplier of water pump pulley spacers. We guarantee that our products are the highest quality and offer the best warranty in the industry. Our customer service is outstanding, and we’re always available to answer any questions or address any concerns you may have. We look forward to doing business with you and hope that you’ll give us a try on your next project.